Baccalauréat 2024 — Physics-Chemistry specialty, Métropole, La Réunion, Mayotte (jour 1) — exercise 3 : Accelerometer of a multifunction device (official exam paper)
Statement
Multifunction devices, often called smartphones, are equipped with several sensors that allow them to be used as measuring instruments. For example, most smartphones have an accelerometer, a sensor that makes it possible to measure the acceleration to which the phone is subjected.
The aim of this exercise is to establish a model for the friction force acting on a smartphone falling through the air, using acceleration measurements provided by the onboard accelerometer.
Data:
- mass of the smartphone used: $m = 182$ g;
- magnitude of the acceleration due to gravity on Earth: $g = 9,81$ m·s$^{-2}$;
- throughout the exercise, the buoyant force exerted by the air on the smartphone is not taken into account.
The motion of the center of mass G of the smartphone is studied in the Earth frame, assumed to be Galilean, equipped with a spatial reference frame with axis $(Oz)$, vertical, oriented upward and unit vector $\vec{k}$ (see figure 1). At time $t = 0$, the smartphone is released flat, with zero initial velocity. Its center of mass G is then at point H with coordinate $z = h$. It is received a few moments later on a cushion placed on the ground. When the smartphone is in contact with the cushion, its center of mass is at altitude $z = 0$.
Figure 1. Modeling the fall of the smartphone. Diagram of a vertical axis $z$ oriented upward, origin 0 at the level of the cushion. Point H is at altitude $h$; the smartphone is represented flat in free fall, with its center of mass G indicated; the cushion is placed at the level $z=0$.
1. Free-fall model without friction
We first assume that the smartphone is undergoing vertical free fall. Friction forces exerted by the air on the moving smartphone are therefore not taken into account.
Q1. In this model, make an inventory of the forces acting on the system {smartphone}. Deduce the expression for the component $a_z$ of the acceleration of the center of mass G of the system.
Q2. Establish the expression for the component $v_z(t)$ of the velocity of the center of mass G of the system, then show that the equation of motion for the altitude $z(t)$ of the center of mass G is:
$z(t) = -\frac{1}{2}·g·t^2 + h$.
The gravitational potential energy reference level $E_{PP}(z)$ is chosen at the origin of the axis $(Oz)$: $E_{PP}(z = 0) = 0$.
Q3. Justify that the mechanical energy $E_M$ of the smartphone is constant and that it has the expression: $E_M = m·g·h$.
2. Experimental study of the fall of the smartphone
To compare the free-fall-without-friction model with the experiment, a phone equipped with an accelerometer is released at time $t = 0$, with zero initial velocity from the height $h = 1,70$ m. Figure 2 is obtained from the values of the acceleration recorded by the sensor between the release of the phone and time $t = 0,47$ s.
Figure 2. Vertical acceleration $a_z$ of the smartphone as a function of time $t$. Graph with $t$ in seconds from 0 to 0,50 on the horizontal axis and $a_z$ in m·s$^{-2}$ from 0 to −12 on the vertical axis. The experimental points form a slightly increasing curve: $a_z$ is about −9,9 m·s$^{-2}$ at $t=0$, about −9,6 m·s$^{-2}$ around $t=0,15$ s, about −9,2 m·s$^{-2}$ around $t=0,30$ s and about −8,4 to −8,5 m·s$^{-2}$ around $t=0,47$ s.
Q4. State, with justification, whether the time evolution of the value of the component $a_z$ of the acceleration obtained experimentally is compatible with the free-fall-without-friction model.
Data processing makes it possible to plot the time evolution of three forms of energy of the smartphone: gravitational potential energy $E_{PP}(t)$, kinetic energy $E_C(t)$ and mechanical energy $E_M(t)$, as shown in figure 3.
Figure 3. Graphical representations of $E_{PP}(t)$, $E_C(t)$ and $E_M(t)$ during the fall of the smartphone. Graph of energies in J as a function of time from 0 to 0,5 s. Three curves are plotted: $E_M(t)$ is an almost horizontal, slightly decreasing curve, around 3,0 J at the beginning and about 2,85 J at $t=0,47$ s; curve A decreases from about 3,0 J at $t=0$ to about 0,55 J at $t=0,47$ s; curve B increases from about 0 J at $t=0$ to about 2,25 J at $t=0,47$ s. Curves A and B cross near $t=0,35$ s for an energy of about 1,5 J.
Q5. Associate, with justification, each time-evolution curve A and B in figure 3 with the corresponding form of energy.
Q6. Show, from figure 3, that the speed of the smartphone is close to 5 m·s$^{-1}$ at time $t = 0,45$ s.
The effects of air friction on the smartphone are represented by a force $\vec{f}$ vertical and directed upward. This force is zero when the speed of the smartphone is zero.
Q7. Applying Newton’s second law to the system {smartphone}, show that the vertical component of the friction force satisfies:
$f = m·(a_z + g)$.
The experimental data make it possible to represent the variations of the vertical component of the acceleration $a_z$ of the smartphone as a function of the square $v^2$ of its speed. The results are shown in figure 4. The experimental data are correctly represented by a linear model:
$a_z = 0,0555×v^2 - 9,80$, where $a_z$ is expressed in m·s$^{-2}$ and $v$ in m·s$^{-1}$.
Figure 4. Modeling of the representation of $a_z$ as a function of $v^2$. Graph with $v^2$ in m$^2$·s$^{-2}$ on the horizontal axis from 0 to 25 and $a_z$ in m·s$^{-2}$ on the vertical axis from −10,0 to −8,2. Experimental points and a straight line of linear modeling are plotted. The line passes approximately through $(v^2=0 ; a_z=-9,80)$ and $(v^2=25 ; a_z=-8,4)$. The given equation is $a_z = 0,0555×v^2 - 9,80$.
Q8. Determine the experimental value of the magnitude of the acceleration due to gravity $g$ that can be deduced from this experiment.
Q9. Show that these results make it possible to deduce that the friction force exerted by the air can be written $f = k·v^2$ where $k$ is a coefficient whose value and unit should be given.
Q10. Calculate the value $f$ of the friction force at the end of the fall. Compare this value with that of the weight of the smartphone and comment.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise