Solved exercises🧮 Solve my exercise

Baccalauréat 2024 — Physics-Chemistry specialty, Métropole (jour 1) remplacement — exercise 3 : Study of an insulated bottle (official exam paper)

PhysicsLevel : High schoolStudy of an insulated bottle🌐 Lire en français
Statement
An insulated bottle makes it possible to keep a liquid hot or cold for a certain length of time. The effectiveness of the insulated bottle depends on the conditions of use but also on its design. The aim of this exercise is to evaluate the heat capacity of the internal vessel of an insulated bottle, shown in figure 1, and to infer the possible nature of the metal from which this vessel is made. Photograph: black cylindrical insulated bottle with a temperature display “58°” on the cap. Figure 1. Simplified cross-sectional diagram of an insulated bottle: red outer bottle surrounding a metallic internal vessel with reflective surfaces. The labels indicate: “Air layer” between the outer wall and the internal vessel; “Trapped air” inside the internal vessel above the liquid; “Central springs” holding the vessel in place; “Outer bottle”; “Gas at very low pressure” in the space around the internal vessel; “Rubber support” under the vessel; “Hot or cold liquid” in the vessel. 1. Structure of the insulated bottle and heat transfer In poor-quality insulated bottles, the space between the internal vessel and the outer bottle is filled with a material that acts as the thermal insulator (polystyrene, for example). In the case of the high-quality insulated bottle studied here and shown in figure 1, the internal vessel is not in direct contact with the wall of the outer bottle and is held in place by central springs and a rubber support. Q1. Identify the mode of heat transfer between the internal vessel and the outside that the use of the central springs and the rubber support aims to minimize. Q2. Explain the purpose of making the inner and outer surfaces of the internal vessel reflective. Q3. The space between the inner surface and the outer surface of the internal vessel contains a gas at very low pressure. Explain the purpose of this choice. 2. Experiment to determine the heat capacity of the internal vessel of the insulated bottle A mass of cold water $m_{EF} = 300\ \mathrm{g}$ is poured into the insulated bottle. The internal vessel and the cold water are at the initial temperature $\theta_{EF} = 15\ ^\circ\mathrm{C}$. The bottle is then filled with a mass of hot water $m_{EC} = 100\ \mathrm{g}$ at the temperature $\theta_{EC} = 60\ ^\circ\mathrm{C}$. The full insulated bottle is quickly closed and then gently shaken. After three minutes, thermal equilibrium is reached and the equilibrium temperature is $\theta_{\mathrm{éq}} = 26\ ^\circ\mathrm{C}$. Data: - specific heat capacities of several metals at atmospheric pressure and at a temperature of 25 °C: Material | Specific heat capacity ($\mathrm{J\cdot kg^{-1}\cdot K^{-1}}$) Silver | 235 Stainless steel | 450 Titanium | 520 Aluminium | 900 - the effect of the trapped air after the insulated bottle is closed is neglected; - the temperature of the outside air and the atmospheric pressure are constant during the experiments; - the temperature of the outside air is: $\theta_{\mathrm{ext}} = 19\ ^\circ\mathrm{C}$; - the heat capacity of the internal vessel of the insulated bottle is denoted $C_{\mathrm{Vase}}$; - the specific heat capacity of water is constant and equal to: $c_E = 4,18\times 10^3\ \mathrm{J\cdot kg^{-1}\cdot K^{-1}}$; - the duration of the experiment is: $\Delta t = 180\ \mathrm{s}$. The insulated bottle is modeled by a system $\{S\}$ made up of the three subsystems: - $\{\mathrm{Internal\ vessel}\}$; - $\{\mathrm{Cold\ water\ introduced\ into\ the\ vessel}\}$; - $\{\mathrm{Hot\ water\ introduced\ into\ the\ vessel}\}$. The changes in internal energy of each subsystem are written: - $\Delta U_{\mathrm{Vase}} = C_{\mathrm{Vase}}\cdot (\theta_{\mathrm{éq}}-\theta_{EF})$ for the subsystem $\{\mathrm{internal\ vessel}\}$; - $\Delta U_{\mathrm{Eau\ froide}} = m_{EF}\cdot c_E\cdot (\theta_{\mathrm{éq}}-\theta_{EF})$ for the subsystem $\{\mathrm{cold\ water}\}$; - $\Delta U_{\mathrm{Eau\ chaude}} = m_{EC}\cdot c_E\cdot (\theta_{\mathrm{éq}}-\theta_{EC})$ for the subsystem $\{\mathrm{hot\ water}\}$. During the experiment, the system $\{S\}$ is assumed to satisfy the following hypotheses: - hypothesis 1: heat transfers with the external environment are neglected; - hypothesis 2: energy transfers in the form of work are also neglected. With the chosen model, the change in internal energy of the system $\{S\}$ is written: $\Delta U_S = \Delta U_{\mathrm{Vase}} + \Delta U_{\mathrm{Eau\ froide}} + \Delta U_{\mathrm{Eau\ chaude}}$ Q4. State how the two hypotheses made make it possible to write that the first law of thermodynamics applied to the system $\{S\}$ gives: $\Delta U_S = 0$. Q5. Deduce that the heat capacity $C_{\mathrm{Vase}}$ is given by the relation: $C_{\mathrm{Vase}} = \dfrac{m_{EC}\cdot c_E\cdot (\theta_{EC}-\theta_{\mathrm{éq}})}{(\theta_{\mathrm{éq}}-\theta_{EF})} - m_{EF}\cdot c_E$ Q6. Calculate the value of the heat capacity $C_{\mathrm{Vase}}$. Q7. Knowing that the internal vessel has a mass $m_1 = 100\ \mathrm{g}$, determine its specific heat capacity. Comment on the result in light of the data provided. In reality, heat transfers between the system $\{S\}$ and the external environment are not nonexistent. Indeed, once thermal equilibrium is reached, it is observed that the temperature of the system decreases after a few hours. The thermal resistance, denoted $R$, between the system $\{S\}$ and the external environment is approximately $R = 23\ \mathrm{K\cdot W^{-1}}$. Q8. Considering that the system $\{S\}$ is at the temperature 26 °C and that the outside air is at the temperature 19 °C, show that the heat flux, denoted $\Phi_{\mathrm{ext}}$, from the system $\{S\}$ to the outside is approximately 0,3 W. Q9. Deduce the order of magnitude of the energy $Q_{\mathrm{ext}}$ exchanged by the system $\{S\}$ with the external environment during the duration $\Delta t$ of the experiment. Q10. Compare $Q_{\mathrm{ext}}$ with the variation in internal energy $\Delta U_{\mathrm{Eau\ chaude}}$ of the hot water introduced into the vessel during the experiment. Comment, indicating whether hypothesis 1 is justified.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise