Baccalauréat 2024 — Physics-Chemistry specialty, Polynésie française (jour 1) — exercise 1 : Hair coloring (official exam paper)
Statement
Changing hair color, restoring pigment to hair that has been whitened by age: this is the promise of hair coloring products. Different techniques are possible: natural colorings, which coat the fiber with pigments from the plant world, and colorings of synthetic origin. Among them, oxidation colorings promise long-lasting results, because the coloring species are trapped inside the hair fiber.
The coloring mixture is prepared just before application; the hairdresser most often mixes approximately equal volumes of an oxidizing solution based on hydrogen peroxide and a coloring cream containing the precursors of the colored molecule and the coupling agents. This cream also contains ammonia or an organic amine to ensure a basic medium. After a processing time to develop the color and rinsing, a shampoo neutralizes the effect of ammonia.
The aim of this exercise is to study some aspects of the formulation of professional products used to dye hair durably.
Study of oxidizing solutions.
The oxidizing solutions used to develop hair colorings contain hydrogen peroxide $\mathrm{H_2O_2(aq)}$. The table in Figure 1 presents different oxidizing solutions available for professional hairdressing use, their mass percentage of hydrogen peroxide, and their density.
Figure 1. Table of the different oxidizing agents available with their mass percentage of hydrogen peroxide and their density:
- Solution No. 1: mass percentage of hydrogen peroxide in the solution $3,0\ \%$; density of the solution $1011\ \mathrm{g\cdot L^{-1}}$.
- Solution No. 2: mass percentage $6,0\ \%$; density $1022\ \mathrm{g\cdot L^{-1}}$.
- Solution No. 3: mass percentage $9,0\ \%$; density $1033\ \mathrm{g\cdot L^{-1}}$.
- Solution No. 4: mass percentage $12,0\ \%$; density $1044\ \mathrm{g\cdot L^{-1}}$.
It is possible to determine the amount-of-substance concentration of hydrogen peroxide $\mathrm{H_2O_2}$ in an oxidizing solution for hair coloring by titration. The titrant is potassium permanganate $(\mathrm{K^+(aq)};\mathrm{MnO_4^-(aq)})$ in acidic medium.
The reaction equation modelling the transformation observed during the titration is:
$2\ \mathrm{MnO_4^-(aq)} + 6\ \mathrm{H^+(aq)} + 5\ \mathrm{H_2O_2(aq)} \rightarrow 2\ \mathrm{Mn^{2+}(aq)} + 5\ \mathrm{O_2(g)} + 8\ \mathrm{H_2O(\ell)}$.
The oxidizing solution, denoted S, is first diluted twentyfold; its amount-of-substance concentration is thus divided by 20. The resulting solution is denoted $\mathrm{S_{20}}$.
Q1. Give the procedure, indicating the glassware, that makes it possible to prepare a volume $V$ equal to 100 mL of solution $\mathrm{S_{20}}$ from solution S.
A volume $V_1$ of solution $\mathrm{S_{20}}$ is placed in an Erlenmeyer flask and a few drops of concentrated sulfuric acid solution are added. The burette contains the potassium permanganate solution $(\mathrm{K^+(aq)};\mathrm{MnO_4^-(aq)})$ with amount-of-substance concentration $c_2$. The volume of potassium permanganate solution required to reach the equivalence point is denoted $V_E$.
Data:
- Value of the volume $V_1$: $V_1 = 10,0\ \mathrm{mL}$;
- Value of the amount-of-substance concentration $c_2$ of the potassium permanganate solution $(\mathrm{K^+(aq)};\mathrm{MnO_4^-(aq)})$: $c_2 = 2,00\times10^{-2}\ \mathrm{mol\cdot L^{-1}}$;
- Value of the volume $V_E$ of potassium permanganate solution delivered at equivalence: $V_E = 18,1\ \mathrm{mL}$;
- Value of the molar mass of hydrogen peroxide: $M_{\mathrm{H_2O_2}} = 34\ \mathrm{g\cdot mol^{-1}}$.
Q2. Establish the relation at equivalence between the amount of hydrogen peroxide $n_1$ and the amount $n_{2E}$ of permanganate ions.
Q3. Determine $c_1$, the amount-of-substance concentration of hydrogen peroxide in solution $\mathrm{S_{20}}$.
Q4. Deduce the amount-of-substance concentration $c$ of hydrogen peroxide in the oxidizing solution S.
Q5. Use the values in the table in Figure 1 to verify that the oxidizing solution studied is solution No. 2.
The volume strength corresponds to the volume of oxygen released by the decomposition into water and oxygen of one liter of hydrogen peroxide solution under standard temperature and pressure conditions.
The reaction equation modelling the decomposition of hydrogen peroxide is:
$2\ \mathrm{H_2O_2(aq)} \rightarrow \mathrm{O_2(g)} + 2\ \mathrm{H_2O(\ell)}$.
The table in Figure 2 presents information about solution No. 2, its mass percentage of hydrogen peroxide, its volume strength, and its density.
Figure 2. Information concerning solution No. 2: oxidizing solution No. 2; mass percentage of hydrogen peroxide in the solution $6,0\ \%$; volume strength $20$ volumes; density of the solution $1022\ \mathrm{g\cdot L^{-1}}$.
Data:
- Molar gas volume at standard temperature and pressure: $V_m = 22,4\ \mathrm{L\cdot mol^{-1}}$;
- Value of the molar mass of hydrogen peroxide: $M_{\mathrm{H_2O_2}} = 34\ \mathrm{g\cdot mol^{-1}}$.
For the next question, the candidate is invited to take initiatives and present the method followed, even if it did not lead to a result. The method is assessed and must be clearly presented.
Q6. Verify that oxidizing solution No. 2, with $6,0\ \%$ by mass of hydrogen peroxide in the solution, indeed corresponds to a volume strength close to 20 volumes.
Study of the coloring cream.
The coloring cream contains a basic species, ammonia or an organic amine, whose role is to set the $pH$ of the coloring mixture to a value of 9.5. At this $pH$, the hair scales open to allow the precursors of the colored species to penetrate the fiber abundantly.
Data:
- Acid-base couple ammonium ion / ammonia: $\mathrm{NH_4^+(aq)}/\mathrm{NH_3(aq)}$;
- Acid/base couples of water: $\mathrm{H_3O^+(aq)}/\mathrm{H_2O(\ell)}$ and $\mathrm{H_2O(\ell)}/\mathrm{HO^-(aq)}$.
Q7. Write the equation of the reaction modelling the action of water on ammonia $\mathrm{NH_3(aq)}$.
Consider an aqueous solution of ammonia with amount-of-substance concentration $c_A$ equal to $1,00\times10^{-2}\ \mathrm{mol\cdot L^{-1}}$. The $pH$ of this solution is equal to 10.6.
Data:
- Value of the ionic product of water $K_e$ at 25°C: $K_e = 1,0\times10^{-14}$.
- Standard concentration: $c^\circ = 1,0\ \mathrm{mol\cdot L^{-1}}$.
Q8. Show that ammonia is a weak base in water.
The measured $pH$ in the "ready-to-apply mixture" is equal to 9.2.
Data:
- Value of the $pK_A$ of the ammonium ion / ammonia couple at 25°C: $pK_A = 9,2$.
Q9. Draw the predominance diagram of the ammonium ion / ammonia couple.
The document in Figure 3 presents compounds used almost systematically in hair colorings. These are compounds that can oxidize very easily.
Figure 3. Skeletal formulas of compounds used in hair colorings:
- Molecule 1: 4-aminoaniline, benzene ring bearing two $\mathrm{-NH_2}$ groups in para positions (1,4), one at the top and the other at the bottom of the ring.
- Molecule 2: 2,4-diaminophenol, benzene ring bearing one $\mathrm{-OH}$ group in position 1, one $\mathrm{-NH_2}$ group in position 2 and one $\mathrm{-NH_2}$ group in position 4.
Q10. Copy the skeletal formula of molecule 2, circle and name the characteristic groups present.
The coupling agents are slightly less sensitive to oxidation than the previous molecules. A structural relation, or constitutional isomerism, between the two types of structure is responsible for this difference. The document in Figure 4 presents a coupler, 3-aminoaniline.
Figure 4. Skeletal formula of a coupler: molecule 3, 3-aminoaniline, benzene ring bearing two $\mathrm{-NH_2}$ groups in meta positions (1,3), one at the top of the ring and the other at the bottom right.
Q11. Name the category of constitutional isomerism between molecule 3 and molecule 1.
Color development.
When the coloring cream and the oxidizing solution are mixed, a colored species gradually appears. This species is capable of dyeing the hair by inserting itself inside the hair fiber. The development of this color can be studied with a spectrophotometer.
When the solution is not too concentrated, it follows the Beer-Lambert law, which can make it possible to verify the coupler content of the coloring cream.
To carry out a simulation of the Beer-Lambert law, a Python program is used; when executed, it gives the result shown in Figure 5.
Figure 5. Graphical representation of the Beer-Lambert law simulation obtained with the Python program: graph of $A$ as a function of $c$ in $\mathrm{\mu mol\cdot L^{-1}}$. A rising red straight line passes approximately through $(c=1 ; A=0,10)$ and $(c=20 ; A=2,00)$. A blue point identified in the legend by $A=1,2 ; c=12,0$ is placed at $(c=12,0\ \mathrm{\mu mol\cdot L^{-1}} ; A=1,2)$.
The solutions in the calibration range considered contain the hair dye obtained by oxidation of the species hereafter called molecule C, in an amount-of-substance concentration range between $1,0\times10^{-6}\ \mathrm{mol\cdot L^{-1}}$ and $2,0\times10^{-5}\ \mathrm{mol\cdot L^{-1}}$.
Data:
- The value of the cuvette path length $\ell$ is equal to $1,0\ \mathrm{cm}$;
- The value of the molar extinction coefficient $\varepsilon$ (epsilon) of the colored species is equal to $1,00\times10^5\ \mathrm{L\cdot mol^{-1}\cdot cm^{-1}}$;
- The Beer-Lambert law applied within its domain of validity is written $A = \varepsilon\cdot \ell\cdot c$ with $A$ the absorbance value, $\varepsilon$ the molar extinction coefficient of the species, $c$ the concentration value, and $\ell$ the cuvette path length of the spectrophotometer.
The Python program is shown in Figure 6.
Figure 6. Python program:
```python
1 import numpy as np
2 import matplotlib.pyplot as plt
3
4 # declare the constants
5 epsilon=
6 l=
7
8 c=np.linspace(1,20,num=2)
9
10 A=
11
12 plt.margins(0)
13 plt.title('Beer-Lambert law')
14 plt.xlabel('c (µmol/L)')
15 plt.ylabel('A')
16 plt.plot(c,A,'r')
17
18
19 pointisole=1.2/(epsilon*l*10**-6)
20
21 plt.plot(pointisole,1.2,'s',label=f"A=1,2 ; c={pointisole}")
22 plt.legend()
23 plt.show()
```
Q12. Copy and complete lines 5, 6 and 10 of the Python code.
The program also displays the value of the amount-of-substance concentration corresponding to an absorbance $A = 1,20$ for a sample prepared by diluting the coloring cream-oxidizing solution mixture 100 times.
It is assumed that the numerical values of the densities of the cream and the oxidizer are close to that of water, the main constituent of the mixture. The mixture is prepared by combining equal volumes of coloring cream and oxidizing solution.
Color development follows the simplified reaction equation:
$2\ \text{molecule 1} + \text{molecule C} \rightarrow \text{colored species}$.
Molecule 1 is 4-aminoaniline; molecule C is represented by a benzene ring bearing one $\mathrm{-OH}$ group, one $\mathrm{-CH_3}$ group, and a side chain containing $\mathrm{-NH-}$ and a terminal alcohol $\mathrm{-CH_2-CH_2-OH}$.
Q13. Determine the amount-of-substance concentration $C_C$ of molecule C in the mixture.
Data:
- The molar mass of molecule C: $M_C = 169\ \mathrm{g\cdot mol^{-1}}$.
Q14. Legislation authorizes up to $1,5\ \%$ by mass of molecule C in the ready-to-use coloring mixture. Verify that the coloring cream complies with the legislation.
The spectrum of the "ready-to-apply mixture" after color development is recorded in Figure 7.
Figure 7. Spectrum of the "ready-to-apply mixture": graph of absorbance as a function of wavelength $\lambda$ in nm, from 350 to 780 nm. The absorbance is high between about 390 nm and 560 nm. It is about 0.6 near 380 nm, reaches about 1.0 near 390 nm, remains close to 0.9 to 1.1 between 400 and 530 nm with a maximum around 445 nm of about 1.1, then decreases: about 0.8 near 560 nm, 0.55 near 590 nm, 0.30 near 620 nm, 0.15 near 660 nm, and about 0.07 beyond 710 nm.
On the star diagram in Figure 8, complementary colors are diametrically opposite.
Figure 8. Star diagram showing complementary colors and wavelengths: violet $(380-420\ \mathrm{nm})$, blue $(435-480\ \mathrm{nm})$, cyan $(480-500\ \mathrm{nm})$, green $(510-560\ \mathrm{nm})$, yellow $(580-595\ \mathrm{nm})$, red $(610-750\ \mathrm{nm})$. Complementary colors are diametrically opposite.
Q15. Using Figures 7 and 8, determine the mainly absorbed color and deduce the dominant color of the "ready-to-apply mixture".
The evolution of absorbance with time is followed; the curve obtained is given in Figure 9.
Figure 9. Graphical representation of absorbance as a function of time for the coloring mixture diluted one hundredfold: graph $A=f(t)$, with $t$ in s from about 400 to 2250 s and $A$ from 0.45 to 1.40. The blue points increase almost linearly: about $A=0,47$ at $t=450\ \mathrm{s}$, $A=0,60$ near $800\ \mathrm{s}$, $A=0,78$ near $1150\ \mathrm{s}$, $A=0,95$ near $1500\ \mathrm{s}$, $A=1,10$ near $1800\ \mathrm{s}$, $A=1,20$ near $2000\ \mathrm{s}$, and $A=1,37$ near $2250\ \mathrm{s}$.
Q16. Give the definition of the rate of appearance of the colored product, denoted $v_{\text{produit}}$.
Q17. From the expression of the Beer-Lambert law, show that the expression for the rate of appearance of the colored product is: $v_{\text{produit}} = \dfrac{1}{\varepsilon\cdot\ell}\cdot\dfrac{\mathrm{d}A}{\mathrm{d}t}$.
Data:
- The value of the cuvette path length $\ell$ is equal to $1,0\ \mathrm{cm}$;
- The value of the molar extinction coefficient $\varepsilon$ of the colored species is equal to $1,00\times10^5\ \mathrm{L\cdot mol^{-1}\cdot cm^{-1}}$.
Q18. Determine the rate of appearance of the product $v_{1500}$ at time 1500 s.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise