Baccalauréat 2024 — Physics-Chemistry specialty, Métropole (jour 2) remplacement — exercise 1 : Hot-air balloon flight (official exam paper)
Statement
Invented at the end of the 18th century by the Montgolfier brothers, the hot-air balloon is the first machine that made it possible for humans to fly.
The aim of this exercise is to study the takeoff of a hot-air balloon as well as heat transfers through its envelope.
Photo: yellow and red hot-air balloon in flight in front of snow-covered mountains, after the France Bleu Pyrénées-Orientales website.
1. The takeoff of the hot-air balloon
A hot-air balloon consists of three main parts: an envelope whose volume is considered constant, a heating system (burner with fuel tank) and a basket.
In this part, we study the takeoff of the hot-air balloon in the terrestrial frame of reference, assumed to be Galilean. In this model, the only forces taken into account are the weight of the hot-air balloon and the buoyant force exerted by the surrounding air on it.
Data:
➢ atomic molar masses: $M(\mathrm{O})=16\times10^{-3}\ \mathrm{kg\cdot mol^{-1}}$, $M(\mathrm{N})=14\times10^{-3}\ \mathrm{kg\cdot mol^{-1}}$;
➢ intensity of terrestrial gravity, assumed constant: $g=9,81\ \mathrm{m\cdot s^{-2}}$;
➢ air, treated as an ideal gas, is composed, in amount of substance, of 80 % dinitrogen $\mathrm{N_2}$ and 20 % dioxygen $\mathrm{O_2}$;
➢ ideal gas constant: $R=8,31\ \mathrm{J\cdot mol^{-1}\cdot K^{-1}}$;
➢ conversion of a temperature $\theta$ expressed in degrees Celsius into a temperature $T$ in Kelvin: $T(\mathrm{K})=\theta(\degree\mathrm{C})+273\ \degree\mathrm{C}$;
➢ the buoyant force $\vec{\pi_A}$ is a force, vertical and directed upward, exerted on any object immersed in a fluid. For an object of volume $V$ fully immersed in a fluid of density $\rho$, the magnitude $\pi_A$ of the buoyant force is given by: $\pi_A=\rho\cdot V\cdot g$;
➢ characteristics of the outside air at ground level: density: $\rho_{\mathrm{ext}}=1,2\ \mathrm{kg\cdot m^{-3}}$; temperature: $\theta_{\mathrm{ext}}=21\ \degree\mathrm{C}$; atmospheric pressure: $p_{\mathrm{atm}}=1,0\times10^5\ \mathrm{Pa}$;
➢ the hot-air balloon studied is made up of an envelope of constant volume $V$ equal to $2,5\times10^3\ \mathrm{m^3}$ and a basket whose volume is negligible compared with that of the envelope;
➢ the mass $m_{\mathrm{ens}}$ of the set consisting of the basket, the envelope, the heating system and the passengers is equal to 500 kg.
Q1. Show that the molar mass $M_{\mathrm{air}}$ of air is close to $29\times10^{-3}\ \mathrm{kg\cdot mol^{-1}}$.
Q2. Using the ideal gas equation of state, express the mass $m_{\mathrm{int}}$ of the air contained inside the envelope as a function of the pressure $p_{\mathrm{int}}$ of the air inside, the volume $V$ of the envelope, the molar mass $M_{\mathrm{air}}$ of air, the ideal gas constant $R$ and the temperature $T_{\mathrm{int}}$ of the air inside the envelope.
Q3. Express the total weight of the system {hot-air balloon + internal air}, denoted $P_{\mathrm{total}}$, as a function of the masses $m_{\mathrm{ens}}$ and $m_{\mathrm{int}}$.
Q4. Calculate the value of the buoyant force $\pi_A$ acting on the system {hot-air balloon + internal air}, at ground level.
Q5. Show that the expression for the minimum temperature $T_{\min}$ of the air inside the envelope for the hot-air balloon to be able to take off is: $T_{\min}=\dfrac{p_{\mathrm{int}}\cdot V\cdot M_{\mathrm{air}}}{R\cdot\left(\dfrac{\pi_A}{g}-m_{\mathrm{ens}}\right)}$.
Calculate the value of $T_{\min}$. It is assumed that the pressure $p_{\mathrm{int}}$ of the air inside the envelope is equal to the atmospheric pressure $p_{\mathrm{atm}}=1,0\times10^5\ \mathrm{Pa}$.
While the hot-air balloon is held on the ground by straps, the pilot operates the burners so that the temperature of the air inside the envelope is greater than the temperature $T_{\min}$.
At time $t=0$, the straps are released and the hot-air balloon, initially at rest, begins its vertical ascent, as shown in figure 1. At this instant, the value of the buoyant force exerted on the system is equal to $\pi_A=2,9\times10^4\ \mathrm{N}$ and the total mass of the system {hot-air balloon + internal air} is $m_{\mathrm{tot}}=2,8\times10^3\ \mathrm{kg}$.
Figure 1. Diagram of the hot-air balloon at time $t=0$: reference frame with vertical axis $z$ oriented upward, origin $O$ on the ground; the hot-air balloon is drawn above the horizontal ground axis.
In a simplified model, only the buoyant force and the weight are taken into account to study the motion of the balloon. It is also assumed that the values of these forces remain unchanged over time.
Q6. Determine the value of the acceleration of the system {hot-air balloon + internal air}. Then calculate its speed after 10 s and then after 1 minute of ascent.
Q7. Comment on the results obtained in the previous question and suggest an improvement to the model. Speeds may be expressed in $\mathrm{km\cdot h^{-1}}$.
2. A more efficient hot-air balloon envelope
Companies specializing in the design of hot-air balloons have developed a new range of envelopes. Unlike traditional envelopes, made of a single layer of nylon, the new envelope models consist of a double layer of nylon. Between the two nylon thicknesses, a layer of air helps limit heat transfer to the outside of the envelope. Fuel consumption is thus reduced.
Data:
➢ thermal resistance of a single-layer envelope: $R_{\mathrm{th},1}=3,0\times10^{-4}\ \mathrm{K\cdot W^{-1}}$;
➢ recall that the heat flux $\phi_1$ through the single-layer envelope of the balloon, from the inside to the outside, is given by the relation: $\phi_1=\dfrac{\theta_{\mathrm{int}}-\theta_{\mathrm{ext}}}{R_{\mathrm{th},1}}$, where $\theta_{\mathrm{ext}}=21\ \degree\mathrm{C}$ is the temperature of the outside air and where $\theta_{\mathrm{int}}=106\ \degree\mathrm{C}$ is the temperature of the inside air.
Q8. State, with justification, the direction of the heat flux through the single-layer envelope of the balloon.
Q9. Calculate the value of the heat flux $\phi_1$ through a single-layer envelope.
Q10. The heat flux $\phi_2$ through the double-wall envelope is $\phi_2=165\ \mathrm{kW}$. Comment.
3. An aluminum water bottle on board the hot-air balloon
The hot-air balloon pilot takes with him an aluminum water bottle containing a hot drink. The time evolution of the temperature of the system {water bottle + drink} is studied in the laboratory and the heat transfer between this system and the outside is modeled by Newton’s law, recalled in the data below.
The temperature of the system at time $t$ is denoted $\theta(t)$. At time $t=0$ corresponding to the beginning of the experiment, the temperature of the system is $\theta_0=48\ \degree\mathrm{C}$.
Data:
➢ heat capacity of the studied system: $C=2,1\times10^3\ \mathrm{J\cdot K^{-1}}$;
➢ total surface area of the bottle exposed to air: $S=0,042\ \mathrm{m^2}$;
➢ the temperature of the outside air is assumed constant throughout the experiment and equal to $\theta_{\mathrm{ext}}=21\ \degree\mathrm{C}$;
➢ Newton’s law gives the expression of the heat flux $\phi$ (in W) received by the system {water bottle + drink}, at temperature $\theta(t)$, from the outside air, at temperature $\theta_{\mathrm{ext}}$: $\phi=h\cdot S\cdot(\theta_{\mathrm{ext}}-\theta(t))$, where $h$ is the surface heat transfer coefficient.
During the experiment carried out in the laboratory, the use of a computerized data acquisition system makes it possible to obtain the evolution of the system temperature over time (figure 2).
Figure 2. Curve showing the evolution of the temperature $\theta$ of the system over time. Graph: horizontal axis “Time $t$ (s)” from 0 to 14 000 s; vertical axis “Temperature $\theta$ (°C)” from 0,0 to 60,0 °C. Crosses indicate the measured temperature and a continuous curve the modeled temperature. Box: “Numerical model: $\theta(t)=27\times e^{(-0,000196\times t)}+21$”. The measured points are approximately: $(0;48)$, $(1000;42)$, $(2000;38)$, $(3000;35)$, $(4000;33)$, $(5000;30,5)$, $(6000;29)$, $(7000;27,5)$, $(8000;26,5)$, $(9000;25,5)$, $(10000;24,8)$, $(11000;24,2)$, $(12000;23,5)$, $(13000;23,0)$ in units s and °C. The modeled curve decreases exponentially from 48 °C to 21 °C.
We consider two close instants $t$ and $t+\Delta t$, the duration $\Delta t$ being assumed small compared with a characteristic time for the evolution of the system temperature.
Q11. Show that the system temperature satisfies the relation: $\theta(t+\Delta t)-\theta(t)=\dfrac{h\cdot S\cdot(\theta_{\mathrm{ext}}-\theta(t))\cdot\Delta t}{C}$.
From the previous result, it can be shown that the temperature $\theta(t)$ of the system during cooling satisfies the following differential equation: $\dfrac{\mathrm{d}\theta(t)}{\mathrm{d}t}+\dfrac{\theta(t)}{\tau}=\dfrac{\theta_{\mathrm{ext}}}{\tau}$ with $\tau=\dfrac{C}{h\cdot S}$ the characteristic time of the system.
The previous differential equation admits general solutions of the form $\theta(t)=A\cdot e^{-\frac{t}{\tau}}+B$.
Q12. Determine the literal expressions of the constants $A$ and $B$ as functions of $\theta_0$ and $\theta_{\mathrm{ext}}$ then calculate their values. Comment.
Q13. Determine the value of the characteristic time $\tau$ from the numerical model in figure 2.
Q14. Deduce the value of the surface heat transfer coefficient $h$, then comment on the result obtained using the values given in the table below.
Table: environmental conditions and surface heat transfer coefficient between air and a solid wall in $\mathrm{W\cdot K^{-1}\cdot m^{-2}}$. Line 1: no air flow, from 5 to 10. Line 2: with air flow, from 10 to 500. From the course by P.-Y. Lagrée, Heat Transfer Coefficient, Fins.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise