Solved exercises🧮 Solve my exercise

Baccalauréat 2025 — Physics-Chemistry specialty, Amérique du Nord (jour 1) — exercise 2 : Physics and road junctions (official exam paper)

PhysicsLevel : High schoolPhysics and road junctions🌐 Lire en français
Statement
When creating a new road junction, civil engineering engineers must determine the safest trajectory for road users. The success of their work depends largely on a remarkable plane curve called a clothoid (Figure 1), which makes it possible to connect a straight line to a circle. This connection helps reduce risks by ensuring a linear increase in acceleration over time until a constant and maximum value is reached in the circular arc. Figure 1. Graphical representation of a clothoid: a spiral plane curve, starting almost horizontally near the origin, gradually winding upward and to the left, then forming several tight loops around a center located approximately at $x = 5$ and $y = 5$ on a graduated coordinate system. Figure 2. Evolution of acceleration on a road junction: graph of acceleration as a function of time. On the “straight line” section, the acceleration is zero and constant; on the “clothoid arc” section, it increases linearly with time; on the “circular arc” section, it remains constant at a maximum value. The situation is illustrated by considering a vehicle traveling on the Cronenbourg interchange, which connects the A351 to the A35 motorway. The study is carried out in the terrestrial frame of reference, assumed to be Galilean. Figure 3. Partial aerial view of the Cronenbourg interchange, Bas-Rhin; coordinates: 48°35'02.9"N, 7°43'31.8"E. Source: ©2020 CNES/Airbus, GeoBasis-DE/BKG, GeoContent, Maxar Technologies, cartographic data. On the aerial view, a white trajectory starts from point O on the A351, follows a section modeled as a clothoid arc up to point S, then a circular arc around a center C toward a point Q. The OP section is close to a straight line; a coordinate system $(O,x,y)$ is drawn with $x$ generally in the initial direction of the road and $y$ upward in the image. On the partial aerial view of the Cronenbourg interchange, a clothoid arc followed by a circular arc can be seen. This model is reproduced in the Appendix to be handed in with the paper (page 14). An orthonormal coordinate system $(O, x, y)$, whose origin O is placed at the start of the clothoid arc, makes it possible to locate the positions. 1. Motion on the clothoid arc (between O and S) The OP section of the interchange at the beginning of the clothoid arc is considered to be a horizontal straight line. Q.1. Determine the value of the vehicle’s acceleration on the OP section from Figure 2 and characterize the motion of the vehicle. We consider a vehicle traveling along the horizontal plane trajectory between O and S. This vehicle is modeled as a material point M, with zero initial acceleration and moving at a constant speed of magnitude $v$ equal to $15,0\ \mathrm{m\cdot s^{-1}}$. Its coordinates $x$ and $y$, taken at regular time intervals, are introduced in the Python program below: Displayed Python program: 1 #beginning of the program 2 from math import * 3 #-----Coordinates of the vehicle positions----- 4 t=[0.00, 1.50, 3.00, 4.50, 6.00, 7.50, 9.00, 10.5, 12.0, 13.5, 15.0] 5 x=[0.00, 0.0624, 0.4818, 1.625, 3.849, 7.500, 12.91, 20.37, 30.11, 42.25, 56.80] 6 y=[0.00, 20.00, 39.99, 59.96, 79.83, 99.49, 118.7, 137.3, 154.7, 170.6, 184.3] 7 vx = [ ] 8 vy = [ ] 9 dt = 1.50 #time between two successive positions 10 for i in range(0, len(t)-1) : 11 vx.append((x[i+1]-x[i])/dt) 12 vy.append((y[i+1]-y[i])/dt) 13 t.pop(0) #removes t[0] and shifts list t to match acceleration 14 ax = [ ] 15 ay = [ ] 16 a = [ ] 17 for i in range(0, len(t)-1) : 18 ax.[grey area masking the line to be completed] 19 ay.[grey area masking the line to be completed] 20 a.append(sqrt(ax[i]**2+ay[i]**2)) #magnitude of the acceleration vector 21 print(t) 22 print(a) The successive values of the magnitude of the vehicle’s acceleration calculated using the program are given in the following table: Table: $t$ (s): 1,50 ; 3,00 ; 4,50 ; 6,00 ; 7,50 ; 9,00. $a$ ($\mathrm{m\cdot s^{-2}}$): 0,1587 ; 0,3218 ; 0,4824 ; 0,6411 ; 0,8070 ; 0,9506. Q.2. On the answer sheet, write the program lines allowing the coordinates $a_x$ and $a_y$ of the acceleration vector to be calculated. Q.3. Using the values given in the table, verify the information in the introductory text stating that the clothoid allows “a linear increase in acceleration over time” by justifying the method used. 2. Motion on the circular arc (between S and Q) The vehicle, modeled as a material point M, continues its trajectory by describing the circular arc, of radius $r = 75,0\ \mathrm{m}$, between points S and Q. The speed magnitude remains constant at $v$ equal to $15,0\ \mathrm{m\cdot s^{-1}}$. Q.4. On the diagram in the Appendix to be handed in with the paper (page 14), draw the unit vectors $\overrightarrow{u_N}$ and $\overrightarrow{u_T}$ of the Frenet frame at point M on the circular-arc trajectory. Q.5. Justify that the vehicle’s acceleration vector between points S and Q is expressed as follows: $\vec{a} = \dfrac{v^2}{r}\ \overrightarrow{u_N}$ Q.6. On the diagram in the Appendix to be handed in with the paper (page 14), represent at the scale 1,0 cm for $1,0\ \mathrm{m\cdot s^{-2}}$, the acceleration vector $\vec{a}$ at point M. A vehicle at rest on a road is subjected to two mechanical actions, modeled by its weight $\vec{P}$ and the reaction $\vec{R}$ exerted by the road surface. In uniform motion in a bend, the vehicle is also subjected to an action, modeled by a force $\vec{f}$ called the friction force. The forces acting on the vehicle lie in the vertical plane perpendicular to the road. Point C is the center of the circular trajectory. The vehicle is modeled by point M. The following five diagrams represent the weight $\vec{P}$, the reaction $\vec{R}$ and the friction force $\vec{f}$. Figure of the five diagrams: in each one, C is to the left of M and the road is represented by a vertical line on the right. Diagram 1: $\vec{P}$ vertically downward applied at M, $\vec{R}$ obliquely upward and to the right, $\vec{f}$ horizontally to the left, directed toward C. Diagram 2: $\vec{P}$ vertically downward, $\vec{R}$ vertically upward, $\vec{f}$ obliquely upward and to the right. Diagram 3: $\vec{P}$ vertically downward, $\vec{R}$ vertically upward, $\vec{f}$ horizontally to the right, opposite C. Diagram 4: $\vec{P}$ vertically downward, $\vec{R}$ vertically upward, $\vec{f}$ horizontally to the right. Diagram 5: $\vec{P}$ vertically downward, $\vec{R}$ vertically upward, $\vec{f}$ horizontally to the left, directed toward C. Q.7. Indicate, with justification, the number of the diagram that correctly represents these three forces, using the characteristics of the acceleration vector. In practice, safety in bends also depends on the quality of the tires, the suspension of the wheels and the grip of the road surface. For a vehicle of mass 1 200 kg, the value of the friction force cannot exceed 10 400 N on dry pavement and 7 200 N on wet pavement. If these values are reached, road grip is no longer ensured and the vehicle skids. Q.8. In the case of the bend studied previously, choose from the speed-limit signs below the one that should be placed before point O. Explain your reasoning. Figure: four circular speed-limit signs are proposed, indicating respectively 50, 70, 90 and 110. The candidate is invited to take initiatives and present the approach followed, even if it did not lead to a result. The approach is assessed and must be properly presented.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise