Solved exercises🧮 Solve my exercise

Baccalauréat 2025 — Physics-Chemistry specialty, Amérique du Nord (jour 1) — exercise 3 : Treatment of the water in a stormwater basin (official exam paper)

PhysicsLevel : High schoolTreatment of the water in a stormwater basin🌐 Lire en français
Statement
In France, excess rainwater produced by storms is sometimes stored in retention basins. But, under the effect of heat, the dissolved oxygen level in this basin water decreases. To ensure that the basin water can be discharged into the natural environment, the dissolved oxygen level is monitored. This function can be carried out by sensors installed on an autonomous buoy. As for oxygenation, it can be provided by a jet aerator. The objective of this exercise is to study the buoyancy of such a buoy, then to evaluate the time needed to improve the water quality by a jet aerator. 1. Monitoring water quality An instrumented autonomous buoy consists of two main parts: the sensor and the float, which contains the communication equipment. The immersion of the buoy must not exceed 20 % of its total volume in order to keep the equipment out of the water and facilitate communication with the outside. Figure 1. Instrumented autonomous buoy: diagram of a vertical buoy composed at the top of a float with communication equipment, wider, and below it an elongated sensor. A photograph shows a buoy floating on the water surface with a yellow part above the water and an antenna. Source: adapted from ijiinus.com. Data: - Buoy volume $V_{bouée} = 6,7 \times 10^{-3}\ \mathrm{m^3}$ ; - Total mass of the buoy $m = 1,0\ \mathrm{kg}$ ; - Density of water $\rho_{eau} = 1,00 \times 10^3\ \mathrm{kg\cdot m^{-3}}$ ; - Gravitational acceleration on Earth $g = 9,81\ \mathrm{N\cdot kg^{-1}}$ ; - Expression for Archimedes’ buoyant force: $\pi_A = \rho_f \cdot V_f \cdot g$ with $V_f$ the volume of fluid displaced and $\rho_f$ the density of the displaced fluid. Q.1. Name the two forces exerted on the buoy assumed to be in equilibrium, then represent them without worrying about scale on an annotated diagram. Q.2. Determine the value of $V_{imm}$, the immersed volume of the buoy at equilibrium. Q.3. Deduce the proportion of the immersed volume relative to the total volume of the buoy. Comment. 2. Water treatment The autonomous buoy measures the dissolved dioxygen level in the water of the stormwater basin. The standard requires that the dioxygen level be between 6 and $8\ \mathrm{mg\cdot L^{-1}}$. Under the effect of heat, this level decreases and reaches $4\ \mathrm{mg\cdot L^{-1}}$: it must be increased. For this purpose, an immersed jet aerator is used to inject air (and therefore dioxygen) into the water. The aerator draws in water and makes it circulate in a horizontal pipe featuring a narrowing from a circular section of diameter $d_A$ to a section of diameter $d_B$. It is at this narrowed part that the water and the air (drawn in from the air inlet) mix. Figure 2. Layout of the immersed jet aerator and zoom on the narrowing (Source: sulzer.com): the aerator is placed underwater; a vertical pipe has an air inlet above the water surface. Water enters the device from below ("Water inlet"), circulates horizontally and exits as a jet. The zoom shows a horizontal pipe whose cross-section decreases from position A, of diameter $d_A$, to position B, of diameter $d_B$; section B is smaller than section A. Data: - Pipe diameter at A, $d_A = 55\ \mathrm{mm}$ ; - Pipe diameter at B, $d_B = 33\ \mathrm{mm}$ ; - Water speed at A, $v_A = 5,6\ \mathrm{m\cdot s^{-1}}$ ; - Water volume in the stormwater basin, $V_{eau} = 172\ \mathrm{m^3}$ ; - Density of the water in the stormwater basin $\rho_{eau} = 1,00 \times 10^3\ \mathrm{kg\cdot m^{-3}}$ ; - Bernoulli relation in the horizontal pipe: $p + \dfrac{1}{2}\cdot \rho \cdot v^2 + \rho \cdot g \cdot z = constante$ with $p$ : pressure ; $\rho$ : density of the fluid ; $g$ : gravitational acceleration ; $z$ : vertical coordinate of the position ; $v$ : fluid speed. It is assumed that water is an incompressible fluid and that the flow is steady. The volumetric flow rate $D_V$ of a fluid in a pipe depends on the speed $v$ of the fluid and the cross-sectional area $S$ of the pipe. Q.4. Rewrite the formula used to calculate the volumetric flow rate $D_V$, justifying the answer by dimensional analysis or unit analysis. $D_V = \dfrac{v}{S}$ ; $D_V = S \cdot v$ ; $D_V = v^2 \cdot S$
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise