Baccalauréat 2025 — Physics-Chemistry specialty, Asie (jour 1) — exercise 2 : Ammoniacal Pollution (official exam paper)
Statement
Ammoniacal nitrogen is often the main chemical indicator of direct pollution of river water following a polluting discharge. It is by detecting the presence of ammoniacal nitrogen that wastewater discharges due, among other things, to human excreta can be located along a watercourse. In water, the presence of ammoniacal nitrogen must not exceed $0{,}10\ \mathrm{mg\cdot L^{-1}}$.
The aim of this exercise is to determine whether a river water sample is polluted by ammoniacal nitrogen.
Data:
- Atomic numbers: $Z(\mathrm{N})=7$ and $Z(\mathrm{H})=1$
- Atomic molar masses: $M(\mathrm{N})=14{,}0\ \mathrm{g\cdot mol^{-1}}$ ; $M(\mathrm{H})=1{,}0\ \mathrm{g\cdot mol^{-1}}$
- Acid-base couples: ammonium / ammonia $\mathrm{NH_4^+(aq)}/\mathrm{NH_3(aq)}$, $\mathrm{p}K_{A1}=9{,}22$ ; water / hydroxide ion $\mathrm{H_2O}(\ell)/\mathrm{HO^-(aq)}$, $\mathrm{p}K_{A2}=14{,}0$.
- Ionic molar conductivities $\lambda^0$ (in $\mathrm{mS\cdot m^2\cdot mol^{-1}}$): $\mathrm{NH_4^+(aq)}$ : 7,35 ; $\mathrm{Na^+(aq)}$ : 5,01 ; $\mathrm{HO^-(aq)}$ : 19,8.
In water, depending on the pH and temperature, ammoniacal nitrogen is found in two forms: the ammonium ion $\mathrm{NH_4^+(aq)}$ and aqueous ammonia $\mathrm{NH_3(aq)}$.
A water sample taken at $20\ ^\circ\mathrm{C}$ from a river is studied. Its pH is equal to 7,2.
Q1- Define an acid according to Brønsted.
Q2- Establish the Lewis structure of ammonia.
Q3- Draw the predominance diagram for the ammonium ion / ammonia couple.
Q4- Identify, with justification, the predominant ammoniacal species in the sampled water.
In the rest of the exercise, only the ammonium ion will be taken into account in the analysis of the sampled water.
A conductimetric titration is performed on a volume $V = 200{,}0\ \mathrm{mL}$ of the sampled water.
For the titration, $50{,}0\ \mathrm{mL}$ of a titrant solution S with amount-of-substance concentration $c_1 = 3{,}50\times 10^{-4}\ \mathrm{mol\cdot L^{-1}}$ in sodium hydroxide $(\mathrm{Na^+(aq)},\ \mathrm{HO^-(aq)})$ is prepared by tenfold dilution of a stock solution $S_0$ available in the laboratory.
Q5- Choose, with justification, the glassware used to carry out the dilution of solution $S_0$ from the list of available equipment:
- a beaker
- a 50 mL Erlenmeyer flask
- a 50,0 mL volumetric flask
- volumetric pipettes: 5,0 mL ; 10,0 mL ; 50,0 mL
- graduated cylinders of 5 mL and 10 mL
After each addition of titrant solution S, the conductivity $\sigma$ of the solution is measured. Figure 1 below shows the variation of conductivity $\sigma$ as a function of the volume $V_1$ of titrant solution S.
Figure 1: Experimental curve of the conductimetric titration of the water sample. Graph with $V_1$ (mL) on the horizontal axis from 0 to 30 and $\sigma$ ($\mathrm{mS\cdot cm^{-1}}$) on the vertical axis from 0 to 0,40. The experimental points show a conductivity of about $0{,}19\ \mathrm{mS\cdot cm^{-1}}$ at $V_1=0\ \mathrm{mL}$, which decreases very slightly to about $0{,}18\ \mathrm{mS\cdot cm^{-1}}$ around $V_1=9$ to $10\ \mathrm{mL}$, then increases approximately linearly: about 0,19 at 11 mL, 0,22 at 14 mL, 0,25 at 16 mL, 0,28 at 18 mL, 0,31 at 20 mL, 0,34 at 23 mL, 0,37 at 25 mL. The change in slope is located around 10 to 11 mL.
The reaction equation underlying the titration is the following:
$\mathrm{NH_4^+(aq)}+\mathrm{HO^-(aq)}\rightarrow \mathrm{NH_3(aq)}+\mathrm{H_2O}(\ell)$
Q6- Justify without calculation the evolution of the curve in figure 1 before and after equivalence.
Q7- Determine the value of the volume $V_{1E}$ of sodium hydroxide added at equivalence, explaining the method used.
Q8- Indicate whether the river water sample is polluted by ammoniacal nitrogen.
To answer this question, the candidate is invited to take initiative and present the approach followed, even if it did not lead to a result. The approach is assessed and must be correctly presented.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise