Baccalauréat 2025 — Physics-Chemistry specialty, Métropole (jour 1) — exercise 3 : Ball-drop viscometer (official exam paper)
Statement
Some mechanical equipment, such as engines, requires oils with a controlled viscosity value in order to operate properly.
The aim of this exercise is to study the operating principle of a ball-drop viscometer used to measure, at room temperature, the viscosity of an oil called “oil C”.
Photograph: KF40 Brookfields® ball-drop viscometer.
The measurement of the viscosity of oil C is based on the vertical fall of a steel ball in a cylindrical container filled with this oil, as shown in figure 1. The motion of the center of mass of the ball is studied in the terrestrial reference frame, assumed to be Galilean, equipped with an origin O, a vertical axis $(Oz)$ directed downward and unit vector $\vec{k}$. The situation is shown schematically in figure 1.
Figure 1. Diagram of the experimental measurement setup. A vertical cylinder filled with oil contains a ball near the top. The origin O is at the initial position of the ball; the $z$ axis is vertical downward; the unit vector $\vec{k}$ points downward. Arrows indicate “Oil”, “Cylinder” and “Ball”.
Data:
The numerical data in this exercise come from work carried out at the University of Grenoble.
- mass density of oil C: $\rho_h = 8,31\times 10^2\ \mathrm{kg\cdot m^{-3}}$ ;
- mass density of the ball: $\rho_b = 1,06\times 10^3\ \mathrm{kg\cdot m^{-3}}$ ;
- radius of the ball: $r = 0,993\ \mathrm{mm}$ ;
- gravitational acceleration: $g = 9,81\ \mathrm{m\cdot s^{-2}}$ ;
- volume of a ball of radius $r$: $V_b = \frac{4}{3}\cdot \pi\cdot r^3$ ;
- to discuss whether an experimental result agrees with a reference value, one may use the quotient $\frac{|x-x_{\mathrm{ref}}|}{u(x)}$ with $x$ the measured value, $x_{\mathrm{ref}}$ the reference value and $u(x)$ the standard uncertainty associated with the measured value $x$.
During its vertical fall in oil C, the ball of mass $m$ is subjected to three forces:
- its weight denoted $\vec{P}$ ;
- the Archimedes buoyant force, exerted by the oil, with vector expression $\vec{P_A}=-\rho_h\cdot V_b\cdot g\cdot \vec{k}$ ;
- the friction force exerted by the oil on the ball, with vector expression under the experimental conditions: $\vec{f}=-\alpha\cdot \eta_C\cdot v\cdot \vec{k}$ with $\alpha$ a constant with the dimensions of a length, depending on the geometrical parameters of the system, $\eta_C$ the viscosity of oil C and $v$ the speed of the center of mass of the ball. One has $\alpha=1,92\times 10^{-2}\ \mathrm{m}$.
Q1. Using dimensional analysis, show that the viscosity $\eta_C$ is expressed in $\mathrm{N\cdot m^{-2}\cdot s}$.
At time $t=0$, the ball is released with zero initial speed from point O, located in the oil, at the top of the cylindrical container. After a short time, the motion of the ball becomes rectilinear uniform, and the ball then reaches a terminal speed denoted $v_{\lim}$.
Q2. State, with justification, whether the value of the friction force $\vec{f}$ increases or decreases when the speed of the ball increases.
Q3. Draw a diagram, without calculation and with justification, showing all the forces applied to the system {ball} when the terminal speed is reached.
Q4. Show that the terminal speed satisfies the equation:
$\alpha\cdot \eta_C\cdot v_{\lim}=\frac{4\cdot \pi\cdot r^3\cdot g\cdot (\rho_b-\rho_h)}{3}$
Q5. The terminal speed of the ball is $v_{\lim}=5,37\ \mathrm{mm\cdot s^{-1}}$. Calculate the viscosity $\eta_C$ of oil C.
Oil C has a reference viscosity equal to $\eta_{\mathrm{réf}}=0,093\ \mathrm{N\cdot m^{-2}\cdot s}$ and the standard uncertainty on the value of the viscosity $\eta_C$ obtained is $u(\eta_C)=0,003\ \mathrm{N\cdot m^{-2}\cdot s}$.
Q6. Determine whether the experimentally obtained value of the viscosity $\eta_C$ is in agreement with the reference value.
We want to determine the time required for the ball, released with zero initial speed, to reach its terminal speed.
Q7. The acceleration vector $\vec{a}$ of the center of mass of the ball is written: $\vec{a}=a\cdot \vec{k}$. Using Newton’s second law, show that the acceleration $a$ can be written:
$a=g\cdot \left(1-\frac{\rho_h\cdot V_b}{m}\right)-\frac{\alpha\cdot \eta_C}{m}\cdot v$ where $m$ is the mass of the ball
Q8. Deduce that the evolution of the coordinate $v$ of the velocity vector $\vec{v}$ of the ball’s fall over time obeys the following differential equation:
$\frac{\mathrm{d}v}{\mathrm{d}t}+\frac{3\cdot \alpha\cdot \eta_C}{4\cdot \rho_b\cdot \pi\cdot r^3}\cdot v=g\cdot \left(1-\frac{\rho_h}{\rho_b}\right)$
If the ball is released with zero initial speed, solving the previous differential equation gives the expression for its speed $v(t)$:
$v(t)=v_{\lim}\cdot \left(1-e^{-\frac{t}{\tau}}\right)$ with $\tau=\frac{4\cdot \rho_b\cdot \pi\cdot r^3}{3\cdot \alpha\cdot \eta_C}$
Q9. Calculate the value of $\tau$ using the reference viscosity value of the oil studied. Justify that one can consider the ball’s speed to be practically equal to its terminal value throughout the entire motion, knowing that the viscometer tube has a height of about 15 cm.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise