Baccalauréat 2025 — Physics-Chemistry specialty, Métropole — exercise 1 : Soap: fragrance, synthesis and use (official exam paper)
Statement
Soap is a hygiene product known since Antiquity. Over the centuries, its manufacturing process and composition have evolved. Indeed, many soaps nowadays contain additives such as fragrances.
The objectives of this exercise are:
- to study the esterification reaction leading to the formation of linalyl ethanoate, a species with a lavender smell used in some soaps, and to improve the yield of this reaction;
- to study the reaction mechanism of a soap synthesis;
- to discuss the influence of water hardness on the foaming power of a soap.
1. Use of ethanoic acid for the synthesis of linalyl ethanoate
Data:
➢ semi-developed formula of linalyl ethanoate: the represented molecule is $\mathrm{CH_3-C(=O)-O-C(CH_3)(CH=CH_2)-CH_2-CH=C(CH_3)_2}$;
➢ physico-chemical properties of different chemical species:
| Name of the chemical species | Ethanoic acid | Linalool | Linalyl ethanoate |
|---|---|---|---|
| Molecular formula | $\mathrm{C_2H_4O_2}$ | $\mathrm{C_{10}H_{18}O}$ | $\mathrm{C_{12}H_{20}O_2}$ |
➢ acid-base pair ethanoic acid / ethanoate ion: $\mathrm{C_2H_4O_2(aq)/C_2H_3O_2^-(aq)}$
➢ ionic product of water at 25 °C: $K_e = 1{,}0\times10^{-14}$;
➢ standard concentration: $c^\circ = 1\ \mathrm{mol\cdot L^{-1}}$.
Q1. Draw the skeletal formula of linalyl ethanoate, then circle the characteristic group of this molecule and name the corresponding functional family.
Linalyl ethanoate is synthesized by reacting linalool with ethanoic acid. The equation of the reaction modeling this chemical transformation, called esterification, is:
$\mathrm{C_2H_4O_2(\ell) + C_{10}H_{18}O(\ell) \rightleftharpoons C_{12}H_{20}O_2(\ell) + H_2O(\ell)}$
This synthesis is a slow and incomplete chemical transformation. We wish to study the time evolution of the extent of reaction, noted $x$, of this reaction. For this purpose, the amount of ethanoic acid remaining in the reaction medium is titrated with an aqueous sodium hydroxide solution at different times $t$ during the transformation.
Q2. Write the equation of the titration reaction.
Before this experiment, we want to check the complete character of the transformation underlying the titration. For this, a volume $V_B = 5{,}0\ \mathrm{mL}$ of an aqueous sodium hydroxide solution of concentration $c_B = 1{,}0\times10^{-2}\ \mathrm{mol\cdot L^{-1}}$ is introduced into a volume $V_A = 50{,}0\ \mathrm{mL}$ of an ethanoic acid solution. Under these conditions, ethanoic acid is in excess. The pH of the mixture at 25 °C is 4.6.
Q3. Calculate, using the value of $K_e$, the final molar concentration of hydroxide ions, noted $[\mathrm{OH^-}]_f$, in this mixture of volume $V_A + V_B$. Deduce that the amount of substance $n(\mathrm{OH^-})$ at the final state in the mixture is about $2{,}2\times10^{-11}\ \mathrm{mol}$.
Q4. Compare this value with that of the initial amount of hydroxide ions introduced and comment.
It is accepted that this result can be generalized to any moment of the titration.
The esterification is monitored experimentally over time. The results obtained make it possible to plot the evolution of the amount of linalyl ethanoate formed, noted $n_{\mathrm{ester}}$, as a function of time (figure 1).
Figure 1. Curve showing the time evolution of $n_{\mathrm{ester}}$. The graph has time $t$ in minutes from 0 to 120 on the x-axis and $n_{\mathrm{ester}}$ in $\times 10^{-4}\ \mathrm{mol}$ from 0 to 35 on the y-axis. The experimental points increase and then reach a plateau: approximately $(5\ \mathrm{min};14)$, $(10;19)$, $(15;21)$, $(25;24)$, $(35;26)$, $(45;28{,}5)$, $(58;29{,}5)$, $(73;30{,}5)$, $(85;30{,}5)$ and $(100;30{,}5)$, with ordinates in $10^{-4}\ \mathrm{mol}$.
Q5. Express the volumetric rate of formation of linalyl ethanoate, noted $v_{\mathrm{ester}}$, as a function of the volume $V$ of the reaction medium and of $n_{\mathrm{ester}}$.
Q6. Describe, justifying your answer, how the volumetric rate of formation of linalyl ethanoate evolves over time. Propose a kinetic factor responsible for this evolution.
The yield of this synthesis is low. In order to improve it, one can consider a setup allowing removal of the water produced during the reaction. Since the system is homogeneous, it is accepted that the equilibrium constant $K$ of the esterification reaction is written:
$K = \dfrac{n(\mathrm{C_{12}H_{20}O_2})_{\mathrm{éq}}\cdot n(\mathrm{H_2O})_{\mathrm{éq}}}{n(\mathrm{C_2H_4O_2})_{\mathrm{éq}}\cdot n(\mathrm{C_{10}H_{18}O})_{\mathrm{éq}}}$
where $n(X)_{\mathrm{éq}}$ represents the amount of substance of species X in the reaction medium at chemical equilibrium.
Q7. Explain how removing water during the synthesis makes it possible to improve the yield.
2. Use of ethanoic anhydride for the synthesis of linalyl ethanoate
Data:
➢ physico-chemical properties of different chemical species:
| Name of the chemical species | Ethanoic anhydride | Linalool | Linalyl ethanoate | Ethanoic acid | Water |
|---|---|---|---|---|---|
| Molecular formula | $\mathrm{C_4H_6O_3}$ | $\mathrm{C_{10}H_{18}O}$ | $\mathrm{C_{12}H_{20}O_2}$ | $\mathrm{C_2H_4O_2}$ | $\mathrm{H_2O}$ |
| Density $\mathrm{g\cdot mL^{-1}}$ | 1.08 | 0.87 | 0.89 | 1.05 | 1.00 |
| Molar mass in $\mathrm{g\cdot mol^{-1}}$ | 102 | 154 | 196 | 60 | 18 |
| Solubility in water | Good | Rather low | Very low | Very good | — |
Linalyl ethanoate can also be synthesized from ethanoic anhydride and linalool. This transformation is complete and can be modeled by the following reaction equation:
$\mathrm{C_4H_6O_3(\ell) + C_{10}H_{18}O(\ell) \rightarrow C_{12}H_{20}O_2(\ell) + C_2H_4O_2(\ell)}$
The synthesis of linalyl ethanoate is carried out by following the steps of the protocol described below:
Step n°1:
- at date $t = 0$, introduce 10 mL of linalool and 10 mL of ethanoic anhydride into a dry flask;
- stir and heat the mixture using a reflux setup for a duration of 30 min.
Step n°2:
- slowly pour 30 mL of distilled water into the flask, through the top of the condenser. The excess ethanoic anhydride is then completely converted into ethanoic acid;
- transfer the contents of the cooled flask into a separating funnel and allow the mixture to separate into layers.
Step n°3:
- recover the organic phase and treat it to remove the remaining impurities.
Q8. Indicate, justifying your answer, the nature and position of the phase in which linalyl ethanoate is found at the end of step n°2.
To verify the composition of the organic phase, it is analyzed using thin-layer chromatography. After revelation with a potassium permanganate solution, the chromatogram reproduced in figure 2 is obtained.
Figure 2. Reproduction of the chromatogram obtained experimentally. TLC plate with a horizontal spotting line at the bottom and three spots: A, B and C. Spot A: linalool; spot B: linalyl ethanoate; spot C: organic phase obtained. The species are dissolved in the mobile phase (cyclohexane / ethyl ethanoate mixture). The plate shows for A a spot at intermediate height, for B a higher spot, and for C two spots: one at the same height as A and the other at the same height as B.
Q9. Identify, justifying your answer, the species present in the organic phase. Comment.
The synthesis is carried out a second time keeping all the experimental parameters unchanged (temperature, duration of the experiment, initial amounts of substance), but by adding a very small amount of an acid, APTS (p-toluenesulfonic acid), to the flask during step 1. The volume of the organic phase then collected is 9.4 mL and the chromatogram obtained is reproduced in figure 3.
Figure 3. Chromatogram obtained experimentally after the second synthesis. TLC plate with three spots: A linalool, B linalyl ethanoate, C organic phase obtained. The species are dissolved in the mobile phase (cyclohexane / ethyl ethanoate mixture). The plate shows for A a spot at intermediate height, for B a higher spot, and for C a single spot at the same height as B.
Q10. Determine the benefit of adding APTS to the reaction medium.
Q11. After showing that linalool is the limiting reagent in the chemical transformation studied, calculate the yield of the synthesis with added APTS.
The candidate is invited to take initiatives and present the approach followed, even if it did not lead to a result. The approach is assessed and must be presented correctly.
3. Synthesis and foaming power of a soap - Water hardness
Data:
➢ the hardness of water or hydrotimetric title (TH) is essentially due to the presence of calcium $\mathrm{Ca^{2+}}$ and magnesium $\mathrm{Mg^{2+}}$ ions. It is expressed in French degrees (°f) and is obtained by the relation:
$\mathrm{TH} = 10^4\cdot [\mathrm{X^{2+}}]$
where $[\mathrm{X^{2+}}]$ represents the sum of the molar concentrations of calcium and magnesium ions expressed in $\mathrm{mol\cdot L^{-1}}$;
➢ range of values of the hydrotimetric title (TH) and corresponding water classification:
| TH (°f) | 0 to 7 | 7 to 15 | 15 to 30 | 30 to 40 | more than 40 |
|---|---|---|---|---|---|
| Water | very soft | soft | moderately hard | hard | very hard |
➢ electronegativity of some atoms:
| Atom | C | O | H |
|---|---|---|---|
| Electronegativity | 2.6 | 3.4 | 2.2 |
Formation of a soap
One of the main applications of base hydrolysis of an ester is the synthesis of soaps. Base hydrolysis of an ester is a slow and complete chemical transformation, during which an alcohol and a carboxylate ion are obtained by reaction between an ester and a hydroxide ion $\mathrm{OH^-}$. The mechanism of this reaction is broken down into three steps presented below, where R1 and R2 represent carbon chains:
- First step: an ester of the form $\mathrm{R_1-C(=O)-O-R_2}$ reacts with the hydroxide ion $\mathrm{HO^-}$ to give a tetrahedral intermediate bearing the groups $\mathrm{R_1}$, $\mathrm{O^-}$, $\mathrm{OH}$ and $\mathrm{OR_2}$ on the central carbon. The step is represented as an equilibrium.
- Second step: the tetrahedral intermediate is converted into carboxylic acid $\mathrm{R_1-C(=O)-OH}$ and alkoxide ion $\mathrm{^-O-R_2}$. The step is represented as an equilibrium.
- Third step: the carboxylic acid $\mathrm{R_1-C(=O)-OH}$ reacts with the alkoxide ion $\mathrm{^-O-R_2}$ to give the carboxylate ion $\mathrm{R_1-C(=O)-O^-}$ and the alcohol $\mathrm{HO-R_2}$.
Q12. Identify, justifying your answer using electronegativities, the electron-accepting site (electrophilic site) of the ester molecule.
Q13. Copy the first step of the mechanism onto your paper, then complete it using curved arrows.
Q14. Indicate, for each of the three steps, the type of reaction involved.
Water hardness and foaming power of a soap
In the presence of calcium $\mathrm{Ca^{2+}}$ and magnesium $\mathrm{Mg^{2+}}$ ions, the carboxylate ions present in a soap form a precipitate, leading to a decrease in its foaming power. The hardness of water therefore affects the effectiveness of a soap.
The hardness of a water sample is determined using a colorimetric titration of the ions $\mathrm{Ca^{2+}}$ and $\mathrm{Mg^{2+}}$, indiscriminately noted $\mathrm{X^{2+}}$, according to the experimental protocol described below:
- introduce a volume $V_{\mathrm{eau}} = 50{,}00\ \mathrm{mL}$ of the water to be studied into an Erlenmeyer flask (associated standard uncertainty: $u(V_{\mathrm{eau}}) = 0{,}03\ \mathrm{mL}$);
- add 20 mL of buffer solution with pH = 10 and a few drops of a color indicator;
- titrate the solution contained in the Erlenmeyer flask with an aqueous disodium EDTA solution $(2\ \mathrm{Na^+(aq)}\ ;\ \mathrm{H_2Y^{2-}(aq)})$ of concentration $c = 5{,}00\times10^{-3}\ \mathrm{mol\cdot L^{-1}}$ (associated standard uncertainty: $u(c)=0{,}06\times10^{-3}\ \mathrm{mol\cdot L^{-1}}$).
The equivalence volume $V_E = 17{,}6\ \mathrm{mL}$ is identified by the color change of the indicator. The associated standard uncertainty for this volume is: $u(V_E)=0{,}1\ \mathrm{mL}$.
Under these conditions, EDTA reacts with the calcium and magnesium ions contained in the water according to the following titration equation:
$\mathrm{X^{2+}(aq) + H_2Y^{2-}(aq) \rightarrow XY^{2-}(aq) + 2\ H^+(aq)}$
Q15. Show that the following relation is verified at the equivalence point of the titration:
$[\mathrm{X^{2+}}] = \dfrac{c\cdot V_E}{V_{\mathrm{eau}}}$
Q16. Calculate the value of the hydrotimetric title TH of the studied water, then determine the associated standard uncertainty $u(\mathrm{TH})$, knowing that:
$u(\mathrm{TH}) = \mathrm{TH}\cdot \sqrt{\left(\dfrac{u(V_E)}{V_E}\right)^2 + \left(\dfrac{u(c)}{c}\right)^2 + \left(\dfrac{u(V_{\mathrm{eau}})}{V_{\mathrm{eau}}}\right)^2}$
Q17. Compare, justifying your answer, the foaming power of a soap in the titrated water with that in water whose hardness would be 30 °f.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise