Baccalauréat 2025 — Physics-Chemistry specialty, Métropole — exercise 2 : Quinton Water (official exam paper)
Statement
René Quinton, a French biologist, discovered and developed the serum that bears his name: Quinton water. Obtained from a sample of seawater, it is then filtered to remove impurities. It is currently marketed, notably in the form of ampoules for, for example, cleaning the nose or eyes.
The aim of this exercise is to determine the chloride ion content of a commercial Quinton water sample from a Breton sea, using a titration monitored by conductimetry.
Data:
- molar ionic conductivities at $25\ ^\circ\mathrm{C}$: table with the ions $\mathrm{Cl^-}$, $\mathrm{Ag^+}$, $\mathrm{NO_3^-}$ and $\mathrm{Na^+}$; $\lambda(\mathrm{Cl^-})=7,63\times10^{-3}\ \mathrm{S\cdot m^2\cdot mol^{-1}}$, $\lambda(\mathrm{Ag^+})=6,19\times10^{-3}\ \mathrm{S\cdot m^2\cdot mol^{-1}}$, $\lambda(\mathrm{NO_3^-})=7,14\times10^{-3}\ \mathrm{S\cdot m^2\cdot mol^{-1}}$, $\lambda(\mathrm{Na^+})=5,01\times10^{-3}\ \mathrm{S\cdot m^2\cdot mol^{-1}}$ ;
- atomic molar mass of chlorine: $M(\mathrm{Cl})=35,5\ \mathrm{g\cdot mol^{-1}}$ ;
- average mass concentration in chloride ions of a Breton seawater sample: $19,4\ \mathrm{g\cdot L^{-1}}$ ;
- the concentration of chloride ions in blood is between 100 and $110\ \mathrm{mmol\cdot L^{-1}}$ ;
- to discuss whether a measurement result agrees with a reference value, one may use the quotient $\dfrac{|x-x_{\mathrm{ref}}|}{u(x)}$ with $x$ the measured value, $x_{\mathrm{ref}}$ the reference value and $u(x)$ the standard uncertainty associated with the measured value $x$.
In the context of this exercise, a Quinton water can be described as isotonic if its chloride ion concentration is within the interval of blood values, hypertonic if it is greater than $110\ \mathrm{mmol\cdot L^{-1}}$ and hypotonic if it is less than $100\ \mathrm{mmol\cdot L^{-1}}$.
1. Preparation of isotonic Quinton water
An isotonic Quinton water is prepared by diluting the commercial hypertonic Quinton water studied by a factor of 5.
Q1. Propose a protocol to prepare $100,0\ \mathrm{mL}$ of isotonic Quinton water from commercial Quinton water. Name, specifying the volumes, the glassware used.
Q2. Verify the isotonic character of the solution thus prepared.
2. Analysis of a hypertonic Quinton water
The hypertonic Quinton water studied is assumed to be an aqueous solution of sodium chloride $(\mathrm{Na^+(aq)};\mathrm{Cl^-(aq)})$. In order to determine its chloride ion concentration, a titration monitored by conductimetry is performed.
Using a volumetric pipette, a volume $V_1=10,0\ \mathrm{mL}$ of hypertonic Quinton water is sampled and introduced into a beaker, to which $200\ \mathrm{mL}$ of distilled water is added.
The resulting solution is titrated with a silver nitrate titrant solution $(\mathrm{Ag^+(aq)};\mathrm{NO_3^-(aq)})$ of concentration $C_2=3,00\times10^{-1}\ \mathrm{mol\cdot L^{-1}}$. Silver ions form with chloride ions a precipitate of silver chloride $\mathrm{AgCl(s)}$. This precipitation reaction can be considered complete.
Q3. Write the equation of the reaction modeling the transformation taking place during the titration.
Python programming is used to simulate and represent the evolution of the concentrations of the species contributing to the conductivity of the solution being titrated as a function of the volume of titrant solution added. The dilution due to the addition of the titrant solution is neglected.
In this program, the following notations are used:
- C_1 : concentration of the titrated solution expressed in $\mathrm{mol\cdot L^{-1}}$ ;
- V_1 : volume of titrated solution expressed in L ;
- C_2 : concentration of the titrant solution expressed in $\mathrm{mol\cdot L^{-1}}$ ;
- V_2 : volume of titrant solution added expressed in L.
Figure 1 gives an excerpt of the program and Figure 2 the result of the simulation obtained.
Figure 1: excerpt of the Python program, lines 8 to 15:
8 # Declaration of variables
10 c_A = [] # Concentration of species A
11 c_B = [] # Concentration of species B
12 c_C = [] # Concentration of species C
13 c_D = [] # Concentration of species D
15 V_E = # Expression of the equivalence volume expressed in L
Figure 2: evolution of the concentrations as a function of the added titrant solution volume. Horizontal axis: added volume of titrant solution in L, from 0 to 0,025 L. Vertical axis: concentration in mol/L, from 0 to 0,035 mol/L. Four series are plotted: species A, star symbols, decreases linearly from about 0,025 mol/L to 0 for $V_2\approx0,018$ L then remains zero; species B, round symbols, is zero before equivalence then increases after $V_2\approx0,018$ L up to about 0,009 mol/L at 0,025 L; species C, gray squares, increases linearly from 0 to about 0,034 mol/L when $V_2$ goes from 0 to 0,025 L; species D, crosses, remains constant at about 0,025 mol/L over the whole domain.
Q4. Identify, with justification, species A, B, C and D among $\mathrm{Na^+}$, $\mathrm{Cl^-}$, $\mathrm{NO_3^-}$ and $\mathrm{Ag^+}$.
Q5. Give the expression for line 15 of the Python program allowing the value of the equivalence volume, denoted V_E, to be calculated as a function of C_1, C_2 and V_1.
Figure A1 in ANNEX TO BE SUBMITTED WITH THE ANSWER SHEET shows the evolution of the conductivity $\sigma$ as a function of the volume $V_2$ of titrant solution added.
Q6. Using the results of the simulation in Figure 2, explain the evolution of the measured conductivity during the titration.
Q7. Use the experimental results to determine the mass concentration $C_{\mathrm{Quinton}}$ of chloride ions in the Quinton water.
The standard uncertainty $u(C_{\mathrm{Quinton}})$ associated with the value of the mass concentration found previously is, in this situation: $u(C_{\mathrm{Quinton}})=C_{\mathrm{Quinton}}\times\sqrt{\left(\dfrac{u(V_1)}{V_1}\right)^2+\left(\dfrac{u(V_E)}{V_E}\right)^2+\left(\dfrac{u(C_2)}{C_2}\right)^2}$ with $u(V_E)=0,5\ \mathrm{mL}$, $u(V_1)=0,02\ \mathrm{mL}$ and $u(C_2)=2\times10^{-3}\ \mathrm{mol\cdot L^{-1}}$.
Q8. Verify whether the concentration found is consistent with the chloride ion concentration of Breton seawater.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise