Solved exercises🧮 Solve my exercise

Baccalauréat 2025 — Physics-Chemistry specialty, Métropole remplacement — exercise 2 : The Color of Beetles (official exam paper)

PhysicsLevel : High schoolThe Color of Beetles🌐 Lire en français
Statement
Beetles have shells made up of nanostructures. When illuminated, these structures create light interferences that give these insects various colors. In this exercise, we will study this phenomenon. The upper part of a beetle’s exoskeleton is shown in Figure 1. It consists of a stack of transparent layers, each a few tens of nanometers thick, with alternating high and low optical refractive indices as shown in Figure 2. Figure 1. Diagram of the beetle’s exoskeleton. On the left, a drawing of a beetle seen from above; a circle identifies an area of its exoskeleton. An arrow leads to an enlarged block showing a layered cross-section: the upper part of the exoskeleton is a stack of many thin layers. After passion-entomologie.fr. When the beetle is illuminated with white light, each monochromatic radiation making up the white light is reflected at each interface between two layers of the upper part of the exoskeleton. The reflected radiations then superpose at the observer’s eye, interfere with each other, and thus produce the perceived color of the beetle. The study is simplified as follows (see Figure 2): - only the interference between the first two reflected rays 1 and 2 is taken into account; - all the layers are assumed to have the same thickness, denoted $e$. Figure 2. Simplified diagram of the situation. An incident radiation arrives from air onto a high-refractive-index layer, of thickness $e$, located above a low-refractive-index layer, of thickness $e$. Two reflected radiations, numbered 1 and 2, travel back toward the eye. The interfaces between air, the high-refractive-index layer, and the low-refractive-index layer are shown. Given data: - refractive index of the layer with the highest index: $n_{\mathrm{fort}} = 1{,}7$; - to discuss whether a measured result agrees with a reference value, one may use the quotient $\dfrac{|x-x_{\mathrm{ref}}|}{u(x)}$ where $x$ is the measured value, $x_{\mathrm{ref}}$ the reference value, and $u(x)$ the standard uncertainty associated with the measured value $x$; - observed color associated with a radiation of wavelength $\lambda$: Table: wavelength $\lambda$ (in nm): 470, 530, 590, 750; color: blue, green, yellow, red. Q1. Recall the condition for obtaining constructive interference between two waves, originating from a single monochromatic source, that have traveled different optical paths. Let $\delta$ denote the optical path difference and $\lambda$ the wavelength. In this exercise, it is assumed that the incident light propagates in a direction perpendicular to the surface of the exoskeleton. For a monochromatic wave of wavelength $\lambda$, the optical path difference $\delta$ at the observer’s eye between the reflected radiations 1 and 2 is given by the following relation: $\delta = 2\cdot n_{\mathrm{fort}}\cdot e - \dfrac{\lambda}{2}$ Q2. Show that the thicknesses corresponding to constructive interference are given by the following relation, in which $k$ is a non-negative integer, called the interference order: $e = \left(k + \dfrac{1}{2}\right)\times \dfrac{\lambda}{2\cdot n_{\mathrm{fort}}}$ The beetle is illuminated with white light. In the reflected light, the light waves that lead to constructive interference have their intensity enhanced. The reflected light therefore appears colored. In the rest of the exercise, only the zero-order interference is considered: $k = 0$. Q3. Determine the thickness of the layers of the shell of a beetle for which the wavelength $\lambda = 530\ \mathrm{nm}$ corresponds to constructive interference. State the apparent color of this beetle. We now want to compare the thickness found previously with a direct measurement on an electron microscope photo of the upper part of the beetle’s exoskeleton. Figure 3. Electron microscope photograph of the upper part of a green beetle. The photograph shows the alternation of high-refractive-index layers (in black) and low-refractive-index layers (in light gray) in the upper part of the exoskeleton of a green beetle. The scale of the photograph is given by the black vertical bar on the right: this bar indicates a length of $1\ \mathrm{\mu m}$. A ruler, marked in cm, is shown on the left of the photograph for any useful measurement. A distance $d$ is indicated vertically on the image; it spans the thickness of about 9 layers. After Bioinspiration Biomimetics (2013). Q4. Using Figure 3, determine the value of the average thickness $e$ of one layer. Explain the method used to obtain the best possible precision in the measurement of $e$. The distance $d$ indicated in Figure 3 may be used as an aid for the measurement. Q5. Indicate one possible source of uncertainty in determining the thickness measurement $e$ carried out in question Q4. We now wish to quantitatively evaluate the precision of this measurement using a numerical simulation. The value of the distance $d$ estimated from the photograph lies within an interval of values expressed in cm. A program written in Python makes it possible to calculate the thickness of one layer for 5,000 lengths randomly chosen within this interval. An excerpt from the program is shown below, in which the function $\mathrm{rd.uniform}(a,b,\mathrm{Nsim})$ returns $\mathrm{Nsim}$ random values between $a$ and $b$. Figure 4. Excerpt from the Python program: 1 import numpy as np 2 import numpy.random as rd 3 import matplotlib.pyplot as plt 5 # Simulation of 5000 lengths randomly chosen within the measurement intervals 6 Nsim = 5000 7 echelle = rd.uniform(2.6, 2.7, Nsim) # measurement interval of the scale bar in cm 8 d_mes = rd.uniform(□, □, Nsim) # measurement interval of the distance d in cm 10 # Calculation of the thickness e in nm 11 e = d_mes*1000/(9*echelle) 13 # Calculation of the mean (in nm) and the standard uncertainty (in nm) on the thickness e 14 e_moy = np.average(e) 15 u_e = np.std(e, ddof=1) 17 # Plotting the histogram and displaying the results 18 plt.hist(e,bins="rice", color="grey") 19 print("STANDARD UNCERTAINTY : u(e) =",u_e," in nm") 20 print("MEAN VALUE : e_moyen =",e_moy," in nm") The program makes it possible to calculate the mean value and the standard uncertainty $u(e)$ on a measurement of $e$, then display: STANDARD UNCERTAINTY : u(e) = 2.5574799015216696 in nm MEAN VALUE : e_moyen = 75.48793757378112 in nm Q6. Copy line 8 of the program and complete it with appropriate values expressed in cm. Q7. Justify the presence of the number 1 000 in the expression on line 11 of the program in Figure 4. Q8. Using the results of the numerical simulation and keeping only one significant figure for the standard uncertainty, write the result of the measurement of the thickness $e_{\mathrm{moyen}}$. Discuss the compatibility of the answer to question Q3, arbitrarily taken as the reference value, with the result of the numerical simulation. Some beetles have two-colored shells. Figure 5 shows electron microscope photos of the upper part of the beetle’s exoskeleton for two areas with different thicknesses and colors. Area 1 is green. The two photos are at the same scale. Figure 5. Electron microscope photos of the upper part of a beetle in two areas perceived as different colors. In the center, a diagram of a beetle; on the left, a micrograph of area 1 perceived as green; on the right, a micrograph of area 2. Each micrograph shows a stack of dark and light layers. The scale of the photograph is indicated by a black vertical bar on the right of each photo: this bar indicates a length of $1\ \mathrm{\mu m}$. The two photos are at the same scale. In area 2, the layers appear thicker than in area 1. After Bioinspiration Biomimetics (2013). Q9. Estimate the wavelength corresponding to constructive interference in area 2. Propose a hypothesis for the perceived color of area 2 of this beetle. The candidate is invited to take initiative and present the approach followed, even if it did not lead to a solution. The approach followed is assessed and therefore needs to be presented clearly.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise