Baccalauréat 2025 — Physics-Chemistry specialty, Métropole remplacement — exercise 3 : Surface treatment of a chess piece (official exam paper)
Statement
The anodization process is a surface treatment process used most often on aluminum parts.
Aluminum $\text{Al(s)}$ is transformed at the surface of the parts into alumina $\text{Al}_2\text{O}_3\text{(s)}$ during electrolysis. This alumina layer therefore protects the part from corrosion and makes it possible for a dye to be absorbed.
In this exercise, we study the anodization process of an aluminum chess piece, as well as its coloration.
Illustrations: a chess piece before surface treatment and a chess piece after surface treatment and coloration.
Data:
- some data concerning commercial sulfuric acid: one-line table indicating formula $\text{H}_2\text{SO}_4$, molar mass $98{,}1\ \text{g}\cdot\text{mol}^{-1}$, density 1,83, mass fraction 98 %, corrosive hazard pictogram;
- molar mass of alumina $\text{Al}_2\text{O}_3\text{(s)}$: $M_{\text{alumine}} = 102\ \text{g}\cdot\text{mol}^{-1}$;
- density of water: $\rho_{\text{eau}} = 1{,}0\ \text{kg}\cdot\text{L}^{-1}$;
- redox couple associated with alumina: $\text{Al}_2\text{O}_3\text{(s)} / \text{Al(s)}$;
- redox couples of water: $\text{H}^+\text{(aq)} / \text{H}_2\text{(g)}$ and $\text{O}_2\text{(g)} / \text{H}_2\text{O(l)}$;
- charge of one mole of electrons: $F = 96\ 500\ \text{C}\cdot\text{mol}^{-1}$;
- the anode is the electrode where oxidation occurs and the cathode is the electrode where reduction occurs.
1. Preparation of the sulfuric anodizing bath
During anodization, a chess piece is immersed in an aqueous sulfuric acid solution at 18 °C. This solution is also called a sulfuric “anodizing bath”.
Q1. State, with justification, the precautions to take when handling sulfuric acid.
Q2. Determine the mass of commercial sulfuric acid to weigh out in order to prepare 500 mL of an aqueous sulfuric acid solution with concentration $180\ \text{g}\cdot\text{L}^{-1}$.
2. Anodization of the chess piece
After being properly cleaned, the chess piece is immersed in the anodizing bath where electrolysis takes place. It then serves as the anode of the electrolysis, the cathode being an inert graphite electrode.
Photograph of the experimental electrolysis setup: a beaker containing the anodizing bath receives two electrodes connected to a generator; on the left, a graphite electrode; on the right, the chess piece immersed and suspended; the setup is electrically powered.
Q3. Indicate whether the transformation taking place during an electrolysis is a spontaneous or forced redox transformation.
Q4. Write the electronic half-equation modeling the electrochemical transformation of aluminum into alumina, then justify that the chess piece to be treated constitutes the anode of the electrolysis.
The cathode is the site of water reduction.
Q5. Write the electronic half-equation modeling the reduction of water, then justify the observation of gas evolution at the graphite electrode.
Q6. Deduce that the reaction equation modeling this electrolysis is written:
$2\ \text{Al(s)}+3\ \text{H}_2\text{O(l)}\rightarrow\text{Al}_2\text{O}_3\text{(s)}+3\ \text{H}_2\text{(g)}$.
Q7. Indicate, on the diagram of the electrolysis setup in the APPENDIX TO BE SUBMITTED WITH THE ANSWER SHEET:
- the direction of electron movement;
- the + and − terminals of the generator;
- the direction of movement of the cations $\text{H}^+\text{(aq)}$ and the anions $\text{SO}_4^{2-}\text{(aq)}$ in the solution between the electrodes.
Appendix description: diagram of the electrolysis carried out for a surface treatment of a chess piece by anodization. A generator $G$ and an ammeter $A$ are connected to two electrodes dipped into a sulfuric anodizing bath containing $2\ \text{H}^+\text{(aq)}$ and $\text{SO}_4^{2-}\text{(aq)}$. On the left, a vertical graphite electrode; on the right, the suspended chess piece. The two electrodes are connected to the generator by conducting wires.
During the 40 minutes of electrolysis, the generator delivers a constant current of intensity equal to $0{,}55\ \text{A}$.
Q8. Determine the theoretical mass of alumina $\text{Al}_2\text{O}_3\text{(s)}$ produced on the chess piece during this electrolysis.
The candidate is invited to take initiatives and to present the method used, even if it does not lead to a result. The approach is assessed and must be correctly presented.
3. Coloring of the chess piece
The alumina layer formed during anodization, of formula $\text{Al}_2\text{O}_3\text{(s)}$, is porous. During coloring, the color pigments lodge in the pores provided that the alumina layer has a thickness of at least 15 µm.
Data:
- density of alumina: $\rho_{\text{alumine}} = 3{,}97\ \text{g}\cdot\text{cm}^{-3}$;
- theoretical mass of alumina formed during the anodization of a chess piece: $m_{\text{alumine}} = 0{,}23\ \text{g}$;
- estimated surface area of a chess piece: $S = 25\ \text{cm}^2$.
Q9. Assuming an anodization yield of 100 %, determine whether coloring of the chess piece is possible following sulfuric anodization.
Q10. The thickness of the alumina layer is in fact close to 19 µm. Calculate the actual yield of this anodization.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise