Solved exercises🧮 Solve my exercise

Baccalauréat 2025 — Physics-Chemistry specialty, Métropole remplacement — exercise 3 : The refrigerator (official exam paper)

PhysicsLevel : High schoolThe refrigerator🌐 Lire en français
Statement
An essential component of kitchens and shops, the refrigerator has been continually improved since the first patent filed in 1835 by Jacob Perkins. It allows us to have a cool place within easy reach. Photograph: open refrigerator containing food. The objectives of this exercise are: - to study in a first part the cooling of a bottle of water placed in an “A” refrigerator intended to keep drinks cool at a temperature of about 7 °C; - to study in a second part the difficulty of opening the door of a “B” refrigerator in two different situations. 1. The “ideal” temperature of a bottle of water to optimize hydration Data: - the system studied in this part is a bottle of water denoted S; - volume of the system S: $V_S = 1{,}5\ \mathrm{L}$; - mass density of the system S: $\rho_S = 1{,}00\ \mathrm{kg\cdot L^{-1}}$; - specific heat capacity of the system S: $c_S = 4{,}18\times10^3\ \mathrm{J\cdot K^{-1}\cdot kg^{-1}}$; - the ideal drinking temperature of water, in order to optimize rehydration of the human body, is: $\theta_{\mathrm{idéale}} = 16\ ^\circ\mathrm{C}$; - Newton’s law gives the expression for the thermal flux $\Phi$ (in W) received by the system S, at a temperature $\theta(t)$, from the air inside the refrigerator whose temperature $\theta_{\mathrm{réfri}}$ is considered constant: $\Phi = \alpha\cdot(\theta_{\mathrm{réfri}} - \theta(t))$ where $\alpha = 0{,}50\ \mathrm{W\cdot K^{-1}}$ is an estimate of the heat transfer coefficient between the system S and the air inside the refrigerator. At time $t = 0$, the system S is placed in the “A” refrigerator, the refrigerator door is closed, then the temperature $\theta(t)$ of the system S is measured at regular time intervals over half a day. Q1. Qualitatively describe the convection phenomenon, one of the modes of heat transfer taking place between S and its environment. Q2. Indicate, with justification, the direction of the thermal transfer $Q$ in the case studied. Using spreadsheet software makes it possible to obtain: - the plot of the experimental temperature curve from the measurements carried out; - the plot of a modeling curve for the time evolution of the temperature $\theta(t)$ of the system S using a function of the general form: $\theta(t) = A\cdot e^{-\frac{t}{\tau}} + B$ where $A$, $B$ and $\tau$ are constants. These two curves are shown in Figure 1 of the APPENDIX TO BE HANDED IN WITH THE PAPER. This appendix (page 13) is not present in the submitted pages; Figure 1 is therefore not describable here. Q3. Express $\theta(t = 0)$ then the limit of $\theta(t)$ as $t \rightarrow +\infty$ in terms of the constants $A$ and $B$. Deduce, using Figure 1 of the APPENDIX TO BE HANDED IN WITH THE PAPER, values for the constants $A$ and $B$, stating their respective units. Q4. Show graphically, by making the construction appear on Figure 1 of the APPENDIX TO BE HANDED IN WITH THE PAPER, that the value of the constant $\tau$ is of the order of $12\times10^3\ \mathrm{s}$. We seek to determine, through a model, the differential equation satisfied by the function $\theta(t)$. For this purpose, we perform an energy balance for the system S, between times $t$ and $t + \Delta t$. Q5. Apply the first law of thermodynamics to the system S between $t$ and $t + \Delta t$ to express the temperature variation $\theta(t + \Delta t) - \theta(t)$ as a function of $\Delta t$, $\rho_S$, $V_S$, $c_S$, $\alpha$ and $(\theta_{{réfri}} - \theta(t))$. We deduce that the differential equation governing the evolution of the temperature $\theta(t)$ is: $\dfrac{\mathrm{d}\theta(t)}{\mathrm{d}t} + \dfrac{\theta(t)}{\tau} = \dfrac{\theta_{{réfri}}}{\tau}$ with $\tau = \dfrac{\rho_S\cdot V_S\cdot c_S}{\alpha}$. The solution of this differential equation is: $\theta(t) = (\theta_0 - \theta_{{réfri}})\cdot e^{-\frac{t}{\tau}} + \theta_{{réfri}}$ For the experiment carried out, it is given: $\theta_0 = 20{,}4\ ^\circ\mathrm{C}$ and $\theta_{{réfri}} = 6{,}8\ ^\circ\mathrm{C}$. Q6. Establish, according to this model, as a function of $\tau$, $\theta_0$, $\theta_{{réfri}}$ and $\theta_{\mathrm{idéale}}$, the expression for the time $t_{\mathrm{idéale}}$ needed for the system S to reach the ideal consumption temperature of a drink. Q7. Calculate this duration $t_{\mathrm{idéale}}$, knowing that $\theta_{\mathrm{idéale}} = 16\ ^\circ\mathrm{C}$. Indicate whether this duration is consistent with the graph in the APPENDIX TO BE HANDED IN WITH THE PAPER. A graphical construction is expected. 2. Opening the door of refrigerator “B” Under normal use conditions, opening the door of another refrigerator called “B” is sometimes difficult. One possible explanation for this difficulty can be considered by looking at the pressure difference between the air inside the refrigerator and the air outside it. Putting the refrigerator into service We study the influence of the temperature change when the refrigerator is put into service on the pressure difference. Data: - air is treated as an ideal gas; - ideal gas constant: $R = 8{,}314\ \mathrm{J\cdot K^{-1}\cdot mol^{-1}}$; - ideal gas equation of state: $P\cdot V = n\cdot R\cdot T$ with $P$ the gas pressure in Pa, $V$ the volume occupied by the gas in $\mathrm{m^3}$, $n$ the amount of substance of gas in mol and $T$ the gas temperature in K; - volume of air in the refrigerator: $V_{\mathrm{réfri}} = 0{,}15\ \mathrm{m^3}$; - temperature of the ambient air outside the refrigerator: $T_{\mathrm{amb}} = 293\ \mathrm{K}$; - pressure of the ambient air outside the refrigerator: $P_{\mathrm{amb}} = 1009{,}1\times10^2\ \mathrm{Pa}$; - acceleration due to gravity: $g = 9{,}8\ \mathrm{N\cdot kg^{-1}}$. At time $t = 0$, the refrigerator door, containing air at temperature $T_0 = T_{\mathrm{amb}}$ and pressure $P_0 = P_{\mathrm{amb}}$, is closed and then the refrigerator is switched on. Let $T$ and $P$ denote, respectively, the temperature and pressure of the air inside the refrigerator at any date. We assume that the refrigerator constitutes a closed system when the door is closed: it does not exchange matter with the outside. Q8. Explain why, under this assumption, the ratio $\dfrac{P}{T}$ can be considered constant during the cooling of the refrigerator air after the door is closed. Q9. Calculate, in this model, the value, denoted $P_{\mathrm{finale}}$, of the air pressure inside the refrigerator when the internal temperature has reached its steady value equal to 277 K. In reality, at this temperature, a final internal pressure close to $1009{,}1\times10^2\ \mathrm{Pa}$ is measured. Q10. Give one possible reason for the discrepancy between the result of the calculation carried out in question Q8 and the pressure actually measured. Difficulty opening a refrigerator door immediately after it is closed In some cases, reopening a refrigerator door immediately after it has been closed can be difficult. To explain this phenomenon, the air pressure inside the refrigerator is recorded during an experiment in which, the refrigerator being open, the door is closed at time $t_1$. The measured pressure evolution is shown in Figure 2. We are interested in reopening the door after a duration $\Delta t$ following the closing. Figure 2. Time evolution of the pressure $P$ of the air inside refrigerator S, before and after the door is closed. Horizontal axis: $t$ in s, from 4472 to 4488 s. Vertical axis: $P$ in $\times10^2\ \mathrm{Pa}$, from 1008,4 to 1009,4. Before closing, the pressure is close to 1009,05 to 1009,1 on the graduated axis. At $t_1 \approx 4476\ \mathrm{s}$, a dashed vertical line indicates the closing of the door. Immediately after, the pressure shows a peak around 1009,3 then drops rapidly; around $t\approx4479\ \mathrm{s}$, it reaches a minimum close to 1008,55. Then it rises gradually: about 1008,65 at 4480 s, 1008,8 at 4482 s, 1008,9 at 4484 s, then about 1008,95 at 4487-4488 s. Q11. Using Figure 2, justify why it may be difficult to reopen the refrigerator door after a duration $\Delta t = 3\ \mathrm{s}$. Q12. By treating the refrigerator door as a very thin solid rectangular plate of surface area $S_{\mathrm{plaque}} = 1{,}2\ \mathrm{m^2}$, determine the value and direction of the resultant $\vec F$ of the pressure forces acting on this plate when one wishes to reopen the door after a duration $\Delta t = 3\ \mathrm{s}$. Comment on the result obtained.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise