Baccalauréat 2025 — Physics-Chemistry specialty, Nouvelle-Calédonie — exercise 2 : Blood flow (official exam paper)
Statement
The aim of this exercise is to study two situations of blood flow in the venous system made up of arteries, veins and capillaries.
Aortic stenosis is a heart condition consisting of a narrowing of the diameter of the aortic valve. This valve is located between the left ventricle of the heart and the main vessel of the human body, the aorta.
In addition, the connection between artery and vein is made through a network of several million capillaries.
Part A – Evidence of aortic stenosis
Data:
• Bernoulli’s relation: it is valid for an ideal fluid (without viscosity) and incompressible, in steady flow (time-independent). The fluid is assumed to be subject only to pressure and gravity forces.
From this relation, for two points A and B located along the same streamline (see figure 1):
$P_A + \rho\times g\times z_A + \dfrac{1}{2}\times\rho\times v_A^2 = P_B + \rho\times g\times z_B + \dfrac{1}{2}\times\rho\times v_B^2$
$P$ denotes the pressure at a point and is expressed in pascals (Pa), $\rho$ is the fluid density in kg·m$^{-3}$, $g$ is the gravitational field strength in N·kg$^{-1}$, and $z$ represents the altitude of the point considered and is expressed in meters (m).
Figure 1 – Example of a situation with a represented streamline: a conduit narrowing then widening, with a vertical $z$ axis oriented upward. Point A is in the wide upstream part, at altitude $z_A$, with pressure $P_A$ and horizontal velocity $\vec v_A$ to the right. Point B is in the downstream part, higher up, at altitude $z_B$, with pressure $P_B$ and horizontal velocity $\vec v_B$ to the right. A streamline connects A to B.
• 1 mmHg corresponds to the pressure difference between two points located in a stationary column of mercury and separated by an altitude difference of 1 millimeter.
• In fluid statics, in Bernoulli’s relation: $v_A = v_B = 0{,}00\ \mathrm{m\cdot s^{-1}}$.
• Blood density: $\rho(\mathrm{sang}) = 1{,}05\times10^3\ \mathrm{kg\cdot m^{-3}}$.
• Mercury density: $\rho(\mathrm{Hg}) = 13{,}6\times10^3\ \mathrm{kg\cdot m^{-3}}$.
• Earth’s gravitational field strength: $g = 9{,}81\ \mathrm{N\cdot kg^{-1}}$.
To model the situation of aortic stenosis, the aortic valve is considered as a succession of cylinders of diameters $d_A$ and $d_B$ as shown in figure 2.
Here, blood will be assumed to be an ideal fluid in steady horizontal flow.
Figure 2 – Model of an aortic valve: a wide horizontal cylindrical tube of diameter $d_A$ containing point A, narrowing toward a narrower cylindrical tube of diameter $d_B$ containing point B; blood flows to the right.
1. Using Bernoulli’s relation applied to fluid statics, show that 1,00 mmHg corresponds to a pressure difference of 133 Pa.
A severe aortic narrowing is defined by:
– a maximum blood speed greater than 4 m·s$^{-1}$ at the outlet of the aortic valve;
– a pressure difference greater than 50 mmHg across the aortic valve (according to European recommendations);
– and a valve cross-sectional area at the narrowing (point B) less than 1 cm$^2$.
During an examination of a patient suspected of having aortic narrowing, Doppler ultrasound is used to measure the blood flow speeds at points A and B located on the same streamline. The following values are obtained:
$v_A = 1{,}0\ \mathrm{m\cdot s^{-1}}$ and $v_B = 4{,}2\ \mathrm{m\cdot s^{-1}}$.
2. Determine the pressure difference $P_A - P_B$ in pascals, then in mmHg.
In order to determine the cross-sectional area of the aortic valve at the narrowing (point B), the diameter $d_A$ at the inlet of the aortic valve is measured by ultrasound. For the previous patient, the following is obtained: $d_A = 20{,}2\ \mathrm{mm}$.
3. Using the previous results and data, justify that the patient analyzed has severe aortic narrowing.
The candidate is invited to take initiative and present the method followed even if it did not lead to a result: the method is assessed and must be presented clearly.
Part B – Poiseuille flow
Blood is a real fluid and, in various cases, its viscosity is not negligible.
For a real fluid to flow between two points, a pressure difference must be applied between these points.
In the case of Poiseuille flow in a horizontal cylindrical conduit of length $L$ and diameter $d$, the pressure difference $\Delta P$ is proportional to the volumetric flow rate $D_v$ of the fluid in the conduit:
$|\Delta P| = R\times D_v$ with $R = \dfrac{64\times L\times \eta}{\pi\times d^4}$
$\eta$ is the viscosity of the fluid, $R$ the flow resistance of the conduit, and $|\Delta P|$ is the absolute value of the pressure variation $\Delta P$.
We consider the simplified situation in figure 3 opposite.
Blood travels through an artery, divides into a network of several million capillaries, assumed to be identical and located at nearly the same altitude, then joins a vein.
We shall consider that the flow resistance of blood is due only to the capillaries.
Figure 3 – Distribution of blood in the capillaries: diagram showing a vertical artery and vein connected by a dense network of branching capillaries. Source indicated: after www.concours-agro-veto.net.
Data:
– Pressure in the artery: $P_1 = 16{,}0\times10^3\ \mathrm{Pa}$.
– Pressure in the vein: $P_2 = 1{,}3\times10^3\ \mathrm{Pa}$.
– Flow resistance of a capillary: $R = 1{,}0\times10^{16}$ S.I.
4. Explain why the flow resistance of blood in a capillary is much greater than that in an artery or a vein.
5. Calculate the volumetric flow rate of blood in a capillary.
In the artery, the volumetric flow rate of blood is $5\times10^{-6}\ \mathrm{m^3\cdot s^{-1}}$.
6. Show that the number $N_C$ of capillaries through which the blood flows is consistent with the underlined part of the introductory text to the left of figure 3.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise