Baccalauréat 2025 — Physics-Chemistry specialty, Nouvelle-Calédonie — exercise 3 : Installation of a road sign (official exam paper)
Statement
Placed at school exits or at dangerous intersections, illuminated traffic signs can warn drivers so that they adjust their speed according to the current limits.
A photograph shows a triangular illuminated warning road sign, topped with a solar panel.
Source: adapted from https://www.trafic.fr/0-signalisation-routiere-panneaux-renforces-leds.html
This exercise studies various aspects of an illuminated road sign, type A13a (warning “area frequented by children”), which has been installed near a school complex. It is powered by a solar panel equipped with an energy storage battery and a speed radar.
Data:
• Planck constant: $h=6,63×10^{-34}$ J·s.
• 1 eV = $1,60×10^{-19}$ J.
• Speed of light: $c=3,00×10^8$ m·s⁻¹.
• Electron mass: $m_e=9,11×10^{-31}$ kg.
• Solar radiant power reaching the Earth’s surface under a clear sky per unit area: $P_S=1000$ W·m⁻².
• Speed limit value in the danger zone: $v_{lim}=30$ km·h⁻¹.
• The transmitter emits an electromagnetic wave with frequency: $f_E=24,125$ GHz.
• The frequency shift $Δf$ is given by the relation (with $v$ the speed of the detected vehicle): $|Δf|=2×f_E×\dfrac{v}{c}$.
Part A – Study of the solar panel
The traffic sign is powered by a set of photovoltaic cells. These are made of silicon, a semiconductor material whose valence band and conduction band are separated by an extraction energy noted $E_{gap}$ (figure 1).
Figure 1 – Energy diagram of silicon: vertical axis $E$ in eV; a valence band at the bottom and a conduction band above. The energy gap between the two bands is indicated: $E_{gap}=1,12$ eV.
Figure 2 – Solar emission spectrum at ground level. Graph showing the luminous spectral intensity in W·m⁻²·nm⁻¹ as a function of wavelength in nm. Horizontal axis from 0 to 2500 nm; vertical axis from 0.0 to 1.8. The spectrum is almost zero before about 300 nm, rises sharply to a maximum of about 1.6 W·m⁻²·nm⁻¹ around 500 nm, then generally decreases with many absorption lines; it remains significant until about 1100 nm, still shows weaker bands between 1200 and 1800 nm, and then becomes very weak beyond about 2000 nm. Source: https://www.nrel.gov/grid/solar-resource/spectra-am1.5.html
1. Describe the photoelectric effect involved in the operation of the photovoltaic cell.
2. Give another application of this phenomenon.
3. Calculate the corresponding wavelength $λ_{seuil}$ required for the electron to cross the energy gap.
4. Using figure 2, indicate whether the use of silicon is suitable for a photovoltaic cell.
The photovoltaic panel, made up of many cells, has the following technical characteristics:
Table of characteristics: electrical voltage $U_{max}$ at maximum power: 23,76 V; electric current intensity $I_{max}$ at maximum power: 0,89 A; efficiency: 12 %; panel dimensions (length × width × thickness): 795 × 220 × 25 (in mm). Source: technical sheet https://www.jade-technologie.com/produits/panneaux-solaires-photovoltaique-verre-tedlar
5. Give the literal expression for the efficiency of the photovoltaic panel.
6. Verify that the efficiency value of the photovoltaic panel is indeed the one indicated by the manufacturer.
Part B – Speed radar
The traffic sign is equipped with a detection radar. It is a speed radar that measures the speed of the vehicle approaching the sign and activates it according to a threshold speed. If the speed of the vehicle is greater than the threshold speed, the LEDs of the road sign light up and flash. The sign is installed upstream of a zone whose speed limit is 30 km·h⁻¹. The threshold speed has been set at 25 km·h⁻¹.
The radar consists of a transmitter and a receiver of electromagnetic waves with speed $c$. An analyzer makes it possible to measure the frequency difference $Δf$ between the emitted wave and the received wave if a moving obstacle appears in front of the radar. This analysis then makes it possible to obtain the speed value $v$ of the detected vehicle.
7. Name and describe the physical principle on which the operation of the radar is based.
A vehicle is approaching the school. When this vehicle passes, the measured frequency difference between the emitted wave and the received wave is $|Δf|=2010$ Hz.
8. Indicate, with justification, whether the frequency of the received signal is lower than, equal to, or higher than that of the emitted signal.
9. Determine whether the road sign lights up or not, when the vehicle passes.
The traffic sign is equipped with a battery to store the energy supplied by the photovoltaic panel. The battery used has a capacity of 4000 mAh.
It is assumed that the average current needed for the LEDs of the road sign to light up and flash is $I_{moyenne}=0,79$ A.
10. Determine the maximum duration of flashing of the road sign possible during the night. Comment.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise