Baccalauréat 2026 — Physics-Chemistry specialty, Amérique du Nord (jour 1) — exercise 1 : Carbon dioxide valorization in cement plants (official exam paper)
Statement
The principle of valorization consists in considering CO₂ as a raw material. CO₂ is captured at the outlet of industrial flue gases, such as those produced in cement plants, and used to make commercially profitable products. Researchers and industrial players place a great deal of hope in methanol production, a product with high energy value.
According to planete-energies.com
This exercise first focuses on the capture of carbon dioxide by ethanolamine, then on quality control of an ethanolamine solution, and finally on the possible use of the captured carbon dioxide in methanol production.
Data for the whole exercise:
- Molar mass of the ethanolamine molecule: $M(\mathrm{C_2H_7NO})=61,0\ \mathrm{g\cdot mol^{-1}}$ ;
- Density of aqueous ethanolamine solutions: $d=1,0$ ;
- Density of water: $\rho_{eau}=1,00\ \mathrm{g\cdot mL^{-1}}$ ;
- Acid-base pair of ethanolamine: $\mathrm{C_2H_8NO^+(aq) / C_2H_7NO(aq)}$ ;
- $pK_A(\mathrm{C_2H_8NO^+ / C_2H_7NO})=9,5$ ;
- $K_e=\dfrac{[\mathrm{H_3O^+}][\mathrm{HO^-}]}{(c^\circ)^2}=1,0\times10^{-14}$ with $c^\circ=1\ \mathrm{mol\cdot L^{-1}}$ ;
- Topological formula of the ethanolamine molecule: HO–CH₂–CH₂–NH₂ chain, represented by a hydroxyl group HO attached to a two-carbon chain ending with an amine group NH₂.
1. Capture of the carbon dioxide molecule by the ethanolamine molecule
To reduce its emissions, the cement industry seeks to capture the carbon dioxide produced by its plants. The most commonly used chemical process is amine scrubbing. This process makes it possible to isolate the CO₂ present in the combustion gases released during cement production.
Amine scrubbing is based on an acid-base reaction between carbon dioxide and an aqueous solution containing about 20% by mass ethanolamine, a weak base.
This transformation is not complete.
Q.1. Reproduce, on your answer sheet, the topological formula of the ethanolamine molecule. Circle the characteristic groups of the molecule and then name the associated functional families.
We consider a volume $V=1,0\ \mathrm{L}$ of an ethanolamine solution at 20% by mass.
Q.2. Verify that the concentration in amount of substance $C$ of the 20% aqueous ethanolamine solution is $3,3\ \mathrm{mol\cdot L^{-1}}$.
Measurement of the pH of the solution gives pH = 11.
Q.3. Draw the predominance diagram for the acid-base pair of ethanolamine.
Q.4. State, with justification, whether ethanolamine is present in the acid or basic form in the solution.
Ethanolamine reacts with water according to the following reaction equation:
$\mathrm{C_2H_7NO(aq)+H_2O(\ell)\rightleftharpoons C_2H_8NO^+(aq)+HO^-(aq)}$
Q.5. Give the expression for the reaction advancement rate $\tau$ of the studied reaction in terms of the final advancement $x_f$ and the maximum advancement $x_{max}$.
Q.6. Express the maximum advancement $x_{max}$ in terms of $C$ and $V$. If needed, the candidate may use an advancement table.
Q.7. Show that the advancement rate $\tau$ can be expressed as: $\tau=\dfrac{K_e\cdot c^\circ}{C\cdot 10^{-pH}}$.
Q.8. Calculate the value of the advancement rate $\tau$ and comment on it with respect to the strength of the base.
We now focus on part of the reaction mechanism for the carbon dioxide capture reaction by ethanolamine, the first steps of which are given below:
Description of the mechanism: step 1: ethanolamine $\mathrm{HO{-}CH_2{-}CH_2{-}NH_2}$ reacts with carbon dioxide $\mathrm{O{=}C{=}O}$ to give a zwitterionic intermediate in which the nitrogen is bonded to the carbon of CO₂: $\mathrm{HO{-}CH_2{-}CH_2{-}NH_2^+{-}C(=O){-}O^-}$. The step is represented by a double equilibrium arrow. Step 2: this zwitterionic intermediate is transformed, by loss of a proton $\mathrm{H^+}$ carried by the nitrogen, into $\mathrm{HO{-}CH_2{-}CH_2{-}NH{-}C(=O){-}O^-}$ and $\mathrm{H^+}$; the step is also represented by a double equilibrium arrow.
Q.9. Identify a reaction intermediate, justifying your answer.
Q.10. Rewrite step 1 and show the movement of electrons using curved arrows. Justify their direction.
2. Quality control of an ethanolamine solution
Ethanolamine can deteriorate over time, leading to a gradual decrease in its concentration. A technician wants to ensure that the aqueous ethanolamine solution S available can be used for carbon dioxide capture. To do this, they perform a pH-metric titration.
The solution S is first diluted 50 times. The resulting solution is denoted S₅₀.
Q.11. Choose the equipment needed to prepare 250,0 mL of solution S₅₀ from solution S, justifying the choice of glassware.
Available glassware:
- Beakers: 50 mL, 100 mL, 250 mL ;
- Volumetric pipettes: 5,0 mL, 10,0 mL, 20,0 mL ;
- Graduated pipettes: 5,0 mL, 10,0 mL ;
- Graduated cylinders: 20 mL, 100 mL, 250 mL ;
- Volumetric flasks: 50,0 mL, 100,0 mL, 250,0 mL.
The technician titrates a volume $V_B=25,0\ \mathrm{mL}$ of diluted solution S₅₀ with pH-metric monitoring. The titrant is hydrochloric acid with concentration $C_A=0,10\ \mathrm{mol\cdot L^{-1}}$. Figure 1 below shows the variation of the pH of the reaction medium as a function of the volume of titrant added.
The reaction equation modeling the transformation observed during the titration is:
$\mathrm{C_2H_7NO(aq)+H_3O^+(aq)\rightarrow C_2H_8NO^+(aq)+H_2O(\ell)}$
Figure 1 – pH-metric titration curve of solution S₅₀: graph with the horizontal axis showing the volume $V$ of titrant added, in mL, from 0 to about 25 mL; left vertical axis: pH from 0 to 12; right vertical axis: $\mathrm{d(pH)}/\mathrm{d}V$ from 0 to about -3. The pH curve decreases slowly from about 11.5 at $V=0$ mL to about 8 at 13 mL, then shows a sharp jump around 14.5 mL, with pH going from about 7 to about 2, then levels off around pH 1 after 16 mL. The derivative curve shows a clear minimum near $V=14,5$ mL, with a value of about -3.
Q.12. Define the equivalence point of a titration.
Q.13. Determine, from the titration curve, the volume $V_E$ of titrant added at equivalence. Explain the method used.
Q.14. Deduce the mass percentage of ethanolamine, in %, of solution S.
The candidate is invited to take initiative and present the method followed, even if it did not lead to a result. The method is assessed and must be clearly presented.
The ethanolamine concentration affects the capture efficiency: too low a concentration reduces performance, too high a concentration increases the risk of equipment corrosion.
Table:
- Mass percentage of ethanolamine: 15 % ; 20 % ; 25 % ; 30 %.
- CO₂ capture efficiency: for 15 %, low ; for 20 %, good ; for 25 %, good to very good ; for 30 %, very good.
- Tolerance to equipment corrosion: for 15 %, very good ; for 20 %, acceptable ; for 25 %, increased risks ; for 30 %, very poor.
According to Wang N., Wang D., Krook-Riekkola A., Ji X. (2023). MEA-based CO₂ capture. Front. Energy Res., 11:1230743 (doi.org/10.3389/fenrg.2023.1230743)
Q.15. Comment on the result by discussing the possibility of using this ethanolamine solution to capture carbon dioxide.
3. Methanol production from captured carbon dioxide
Methanol (CH₃OH) can be obtained by reaction between carbon dioxide and dihydrogen; water is also formed. The transformation is complete.
Q.16. Write the reaction equation modeling methanol formation.
In France, the EDF-Hynovi project plans to produce 200 000 tonnes of synthetic methanol per year from the CO₂ of a cement plant. The quantity of dihydrogen required is 37 500 tonnes. To produce the dihydrogen, the plant plans to use electrolyzers with a total power of 330 MW. The energy required to produce one kilogram of dihydrogen is 55 kW·h.
Q.17. Determine the time required to produce the 37 500 tonnes of dihydrogen.
Q.18. Deduce whether the power of the electrolyzers is sufficient for the expected production.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise