Solved exercises🧮 Solve my exercise

Baccalauréat 2026 — Physics-Chemistry specialty, Asie (jour 2) — exercise 1 : Escape game (official exam paper)

PhysicsLevel : High schoolEscape game🌐 Lire en français
Statement
The escape game, better known as an Escape Game, is a type of scripted live-action role-playing game. Players generally move around in an enclosed, themed location, solving puzzles within a given time limit in order to complete the mission. The aim of this exercise is to analyze three situations that may be encountered in an escape game. Part 1 – Target to reach A recurring mission consists in unlocking the exit door of a room. In this part, the door opens when a projectile launched by the miniature replica of a cannon enters a lock and releases the mechanism. To do this, the players must adjust the height $H_T$ of a table on which the cannon is placed (figure 1). This height can vary between 40 and 80 cm. Figure 1: Overall drawing (not to scale). The figure shows a table with adjustable height $H_T$, on which a miniature cannon is placed. The projectile to be launched leaves the cannon at a height $H_B$ above the tabletop. On the right, a door to be opened has a lock whose entry is at point $C$, located at a height $h_C$ above the ground. We study the motion of the center of mass M of the projectile of mass $m$ in the room reference frame, assumed to be Galilean. We consider that when the ball has left the cannon, it is subject only to its weight (figure 2). Figure 2: Detailed diagram of the situation. A coordinate system $(O,x,z)$ is shown, with the $x$-axis horizontal to the right and the $z$-axis vertical upward. The starting point $M$ of the projectile is located at the height $H=H_T+H_B$ above the ground. The initial velocity vector $\vec{v_0}$ makes an angle $\alpha$ with the horizontal. The weight vector $\vec{g}$ is vertically downward. The entry of the lock is point $C$, located at the horizontal distance $D$ from the starting point and at the height $h_C$ above the ground. Data: - Gravitational acceleration: $g=9,81\ \mathrm{m\cdot s^{-2}}$ - Mass of the projectile: $m=100\ \mathrm{g}$ - Fixed inclination angle of the cannon relative to the horizontal: $\alpha=43,0^\circ$ - Initial speed of the projectile: $v_0=5,60\ \mathrm{m\cdot s^{-1}}$ - Distance between the table and the lock: $D=3,00\ \mathrm{m}$ - Height between the cannon outlet and the top of the table: $H_B=30,0\ \mathrm{cm}$ - Height between the ground and the lock entry: $h_C=1,00\ \mathrm{m}$ - Height of the table: $H_T$ - Height between the cannon outlet and the ground: $H=H_T+H_B$ Q1- Express the components of the acceleration vector of the center of mass M of the projectile by applying Newton’s second law. Q2- Show that the time equations of its motion are: $\overrightarrow{OM}(t)\begin{pmatrix}x(t)=v_0\cdot \cos(\alpha)\cdot t\\ z(t)=-\dfrac{1}{2}\cdot g\cdot t^2+v_0\cdot \sin(\alpha)\cdot t+H\end{pmatrix}$ Q3- Deduce that the equation of the trajectory of the center of mass M can be written: $z(x)=-\dfrac{g}{2\cdot v_0^2\cdot \cos^2(\alpha)}\cdot x^2+\tan(\alpha)\cdot x+H$ The lock opens if the center of mass M of the projectile passes through point C at the entry of the lock. Q4- Determine and calculate the value of the table height $H_T$ to be adjusted in order to unlock the lock. To answer this question, the candidate is invited to take initiative and present the method used, even if it did not lead to a result. The method is assessed and must be correctly presented. Part 2 – Resistance to adjust To obtain a clue needed to continue the game, the players must open a safe. The safe opens only if the hand of a clock initially set to 0 s stops on the 14 s mark of the dial. The rotation time of the hand is controlled by an electrical circuit whose diagram is given in figure 3 below. The objective for the participants is to determine the value $R$ of the ohmic conductor so that the hand moves for exactly 14 s. They choose $R$ using a variable resistor. Any failure resets the clock to the 0 position. Figure 3: Diagram of the electrical circuit. The circuit includes a voltage source $U_0=5,0\ \mathrm{V}$, a switch $K$ that can be switched between positions 1 and 2, a capacitor of capacitance $C$ and an ohmic conductor of adjustable resistance $R$. The voltages $u_C$ across the capacitor and $u_R$ across the resistor are oriented upward for $u_C$ and downward for $u_R$. The current $i$ is indicated in the capacitor branch. The capacitor is initially charged: its voltage is $U_0=5,0\ \mathrm{V}$. At $t=0\ \mathrm{s}$, the switch $K$ is moved from position 1 to position 2: the capacitor of capacitance $C=47\ \mathrm{\mu F}$ discharges through an ohmic conductor of resistance $R$ with adjustable value. The rotation of the hand starts when $u_C=4,0\ \mathrm{V}$ and stops when $u_C=1,0\ \mathrm{V}$. Q5- Show that the differential equation modeling the evolution of the voltage $u_C$ across the capacitor during its discharge is: $\dfrac{\mathrm{d}u_C}{\mathrm{d}t}+\dfrac{1}{\tau}\,u_C=0$ where $\tau$ is a time constant whose expression in terms of $R$ and $C$ will be given. Q6- Verify that this differential equation admits a solution of the form: $u_C(t)=A\cdot \exp\left(-\dfrac{t}{\tau}\right)$ where $A$ is a constant whose expression in terms of the electrical circuit parameters will be given. Figure 4 shows discharge curves obtained experimentally for different values of $R$. Figure 4: Discharge curves of the capacitor of capacitance $C=47\ \mathrm{\mu F}$. The graph gives $u_C$ in volts as a function of time $t$ in seconds. The vertical axis goes from 0 to 6 V and the horizontal axis from 0 to 40 s. The three curves start from $u_C=5\ \mathrm{V}$ at $t=0$. Curve $R_2$ (solid line) decreases the fastest: it is about 4 V at 1 s, 2 V at 4 s, 1 V at 8 s and becomes almost zero at 20 s. Curve $R_1$ (dash-dot line) decreases at an intermediate rate: it is about 4 V at 3 s, 2 V at 9 s, 1 V at 17 s and about 0,2 V at 32 s. Curve $R_3$ (dashed line) decreases the slowest: it is about 4 V at 5 s, 2 V at 14 s, 1 V at 25 s and about 0,6 V at 34 s. Q7- Determine which of the three discharge curves (labeled $R_1$, $R_2$, $R_3$) corresponds to the correct rotation-control duration of the hand to open the safe. The method will be presented on the figure of APPENDIX p. 11 TO BE SUBMITTED WITH THE ANSWER SHEET. Q8- Deduce from the chosen curve the corresponding value of the discharge time constant $\tau$. The method will be presented on the figure of APPENDIX p. 11 TO BE SUBMITTED WITH THE ANSWER SHEET. Q9- Calculate the value of the resistance $R$ of the ohmic conductor that the players must choose to open the safe. Appendix to be submitted with the answer sheet – Exercise 1 – Discharge curves: the appendix reproduces in larger size the graph of figure 4, rotated on the page, with axes $u_C\ (\mathrm{V})$ scaled from 0 to 6 and $t\ (\mathrm{s})$ scaled from 0 to 40. The same three curves $R_2$ (solid line), $R_1$ (dash-dot), and $R_3$ (dashed) are shown. Part 3 – Cells to light up Five photosensitive cells are located at the bottom of a black box in which a red laser propagates. The light beam enters through two small slits with adjustable separation $b$ once the sliding shutter is removed (figure 5). An alternation of dark and bright regions appears on the bottom of the box (figure 6). A key will be delivered when the center of each photosensitive cell receives the laser light. Figure 5: Diagram of the setup. On the left is a red laser. The beam passes through a sliding shutter containing two slits $F_1$ and $F_2$ separated by an adjustable distance $b$. On the right, at the bottom of the box, five vertically aligned photosensitive cells receive the light. The distance between the slits and the cells is denoted $D$. The distance between the center of the first cell and that of the fifth is denoted $\ell$. Figure 6: Diagram of the bottom of the box. The bottom of the box shows a horizontal alternation of dark and bright regions. Five photosensitive cells are placed at the center of five equally spaced bright regions. The distance between the center of the first cell and that of the fifth is $\ell$. In figures 5 and 6, the scale is not respected. Data: - Wavelength of the laser: $\lambda=650\ \mathrm{nm}$ - Distance between the slits and the photosensitive cells: $D=30\ \mathrm{cm}$ - Distance between the center of the first cell and that of the fifth: $\ell=2,0\ \mathrm{cm}$ - Expression of the fringe spacing $i=\dfrac{\lambda\cdot D}{b}$ Q10- Name the physical phenomenon responsible for the existence of the alternation of dark and bright regions on the bottom of the box. Q11- Define a fringe spacing $i$. Q12- Determine the value of the slit separation $b$ to be adjusted in order to deliver the key. To answer this question, the candidate is invited to take initiative and present the method used, even if it did not lead to a result. The method is assessed and must be correctly presented.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise