Baccalauréat 2026 — Physics-Chemistry specialty, Centres étrangers G1 (jour 2) — exercise 2 : Azelaic acid in cosmetics (official exam paper)
Statement
Azelaic acid is a dicarboxylic acid naturally present in cereals (wheat, barley, rye) and widely used in dermatology for its antibacterial and anti-inflammatory properties, notably in the treatment of acne.
The aim of this exercise is, after studying the azelaic acid molecule, to verify the mass percentage of a commercial serum based on this molecule.
Data: Official nomenclature rules:
- Table “Name / Number of carbon atoms”: Methane 1; Ethane 2; Propane 3; Butane 4; Pentane 5; Hexane 6; Heptane 7; Octane 8; Nonane 9; Decane 10.
- Table “Chemical family / Suffix”: Carboxylic acid: acid …oic; Ester: …oate of …yl; Aldehyde: -al; Alcohol: -ol.
- Box: If several characteristic groups of the molecule are identical, the suffix linked to the chemical family is preceded by di, tri or tetra respectively for 2, 3 or 4 identical groups.
1. Properties of azelaic acid
The formula of azelaic acid is: $\mathrm{HOOC-(CH_2)_7-COOH}$.
Q.1. Write the skeletal formula of this molecule.
Q.2. Circle the characteristic group(s) and name the associated chemical functions.
Q.3. Use the nomenclature rules provided to name the azelaic acid molecule using official nomenclature.
Azelaic acid is a weak diacid written $\mathrm{AH_2}$. Its two acidities, marked by the loss of a first proton $\mathrm{H^+}$ and then a second, can be characterized by two $pK_a$ values: $pK_{a1}=4{,}55$ and $pK_{a2}=5{,}50$.
Q.4. Establish the predominance diagram of azelaic acid.
Q.5. Determine the predominant form of azelaic acid in a medium whose pH is 4,7 (average pH of facial skin).
2. Titration of azelaic acid in a commercial solution
On the website selling this serum, the following description can be read:
“Overall blemish-fighting, this serum concentrated to 10 % by mass in azelaic acid provides a solution for combination, oily, blemish-prone and acne-prone skin that wants to regain a clear, even complexion. 100 % natural origin, azelaic acid, [...], acts simultaneously on several factors responsible for acne.”
Photographic document: photograph of a pump bottle of “Azelaic Acid Serum 10 %”. Source: aroma-zone.com.
First, a diluted serum solution is prepared according to the protocol below:
- Pour the entire bottle, i.e. a volume $V_{\mathrm{sérum}} = 30{,}0\ \mathrm{mL}$, into a 100,0 mL volumetric flask;
- Add water, make up to the mark. Shake to homogenize.
To verify the mass percentage indicated by the commercial website, a pH-metric titration is performed. A volume $V_a = 10{,}0\ \mathrm{mL}$ of the diluted serum solution is titrated with a sodium hydroxide solution of amount concentration $C_b = 0{,}200\ \mathrm{mol\cdot L^{-1}}$.
Data:
- Density of the commercial serum: $d_{\mathrm{sérum}} = 1{,}03$;
- Mass density of water: $\rho_{\mathrm{eau}} = 1{,}00\ \mathrm{g\cdot mL^{-1}}$;
- Molar mass of azelaic acid: $M = 188{,}2\ \mathrm{g\cdot mol^{-1}}$;
- pH-metric monitoring curve obtained: Figure 1 – pH-metric titration curve. The graph shows on the horizontal axis the volume $V$ of titrant solution added, in mL, from 0 to 25 mL. The left vertical axis gives the pH from 0 to 12; the right vertical axis, in blue, gives $\dfrac{\mathrm{d}pH}{\mathrm{d}V}$ from 0 to about 3,5. The black pH curve starts at about pH 4,0 at $V=0$, increases slowly to about pH 5,7 at $V=15\ \mathrm{mL}$, then shows a marked jump between about $16{,}5$ and $18{,}5\ \mathrm{mL}$; it reaches about pH 11 at $18\ \mathrm{mL}$ and tends toward pH 12 between 20 and 25 mL. The blue derivative curve shows a single peak centered at $V_E \approx 17{,}3\ \mathrm{mL}$, with a height of about 3,5; it is close to 0 outside the equivalence region.
- To discuss the compatibility of the result of a measurement $A_{\mathrm{mes}}$ with a reference value $A_{\mathrm{ref}}$, one can use the quotient: $\dfrac{|A_{\mathrm{mes}}-A_{\mathrm{ref}}|}{u(A_{\mathrm{mes}})}$ with $A_{\mathrm{mes}}$ the measured value; $A_{\mathrm{ref}}$ the reference value; $u(A_{\mathrm{mes}})$ the standard uncertainty of the measured value $A_{\mathrm{mes}}$.
- The standard uncertainty on the measurement of the mass percentage $w$ under the experimental conditions is $u(w)=0{,}4\ \%$.
Q.6. Draw and label the setup allowing this titration to be carried out, indicating the name and position of the titrant and titrated chemical species.
The equation for the titration reaction is: $\mathrm{AH_2(aq) + 2\ HO^-(aq) \rightarrow A^{2-}(aq) + 2\ H_2O(\ell)}$;
Q.7. Show, using the titration results, that the mass of azelaic acid in a bottle of serum is $3{,}3\ \mathrm{g}$.
The candidate is invited to take initiative and present the method followed, even if it did not lead to a result. The method is assessed and must be properly presented.
Q.8. Deduce whether the experimentally determined mass percentage is consistent with the value indicated by the sales website.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise