Solved exercises🧮 Solve my exercise

Baccalauréat 2026 — Physics-Chemistry specialty, Métropole (jour 2) — exercise 1 : Fruit kefir (official exam paper)

PhysicsLevel : High schoolFruit kefir🌐 Lire en français
Statement
Fruit kefir is a fermented drink, naturally sparkling and low in sugar, obtained by fermentation using kefir grains. These grains are made up of yeasts and bacteria, microorganisms responsible for the fermentation process. Image: photograph of kefir grains, a translucent white granular cluster placed on a spoon. Caption: “Kefir grains. After mphn.fr/fr”. The aim of this exercise is to study different parameters in the preparation of kefir that may influence its taste characteristics, in particular the parameters linked to fermentation. A recipe for producing 1 litre of fruit kefir can be found on the internet: - ingredients: - 20 g of kefir grains; - 20 g of sugar; - 2 slices of lemon; - 1 dried fig; - sufficient tap water to obtain 1 L of drink; - recipe: - put all the ingredients into a large sealed jar; - leave to ferment at room temperature in a dry place, away from light, for at least 24 h. 1. Determining the concentration of chloride ions present in tap water The chloride ion content of tap water must be controlled because a concentration that is too high destroys the bacteria, thus preventing the chemical transformations that occur during fermentation. A conductimetric titration of a volume $V_1 = 250,0\ \text{mL}$ of tap water is carried out using an aqueous silver nitrate solution $(\text{Ag}^+(\text{aq}) ; \text{NO}_3^-(\text{aq}))$ with concentration $C = 1,00\times10^{-2}\ \text{mol}\cdot\text{L}^{-1}$. The reaction equation modelling the transformation underlying this titration is: $\text{Ag}^+(\text{aq}) + \text{Cl}^-(\text{aq}) \rightarrow \text{AgCl}(\text{s})$. Data: - atomic molar mass of chlorine: $M(\text{Cl}) = 35,5\ \text{g}\cdot\text{mol}^{-1}$; - molar ionic conductivities at 25 °C of some ions: - $\lambda(\text{Cl}^-) = 7,6\ \text{mS}\cdot\text{m}^2\cdot\text{mol}^{-1}$; - $\lambda(\text{NO}_3^-) = 7,1\ \text{mS}\cdot\text{m}^2\cdot\text{mol}^{-1}$; - $\lambda(\text{Ag}^+) = 6,2\ \text{mS}\cdot\text{m}^2\cdot\text{mol}^{-1}$. Q1. Sketch the titration setup and label the apparatus and glassware, clearly identifying where the titrant solution and the titrated solution are located. We want to study the evolution of the amounts of substance of the species $\text{Cl}^-$, $\text{Na}^+$, and $\text{AgCl}$ present in the medium during the titration and predict the shape of the titration curve. A Python program can be used to simulate the titration performed, taking a concentration value for the titrated solution close to the expected one. An excerpt from this program is given in Figure 1. Figure 1. Excerpt from the Python program: 1 from pylab import * 2 3 C1=5E-4 # Concentration of titrated solution in mol/L 4 V1= # Volume of titrated solution in mL 5 C= # Concentration of titrant solution in mol/L 6 Vmax=25 # Maximum displayed volume in mL 7 VE= # Calculation of the equivalence volume in mL 8 9 ### Lists of amounts of substance [initial, at VE, at Vmax] (in mol) 10 ### Amount of substance of silver ions (in mol) 11 ntitrant=[0,0,C*(Vmax-VE)*0.001] 12 ### Amount of substance of chloride ions (in mol) 13 ntitré=[C1*V1*0.001,0,0] 14 ### Amount of substance of silver chloride formed (in mol) 15 nproduit= 16 17 V=[0,VE,Vmax] Q2. Copy lines 4 and 5 of the code onto your paper and complete them with a numerical value. Q3. Copy line 7 of the code onto your paper and complete it with the expression for the equivalence volume in terms of the data defined in the Python program. Lines 11, 13 and 15 of the code are used to calculate the amounts of substance for the chemical species mentioned in the simulation. Line 15 gives the expressions for the amounts of substance of the silver chloride formed for three different volumes of titrant solution added: $V = 0$ ; $V = VE$ and $V = Vmax$. Q4. Copy then complete line 15 of the program on your paper, using the parameters $C$ and $VE$, following the same model as lines 11 and 13. The nitrate ion $\text{NO}_3^-$ is another ionic species present in the reaction medium: this species does not take part in the chemical transformation involved. After execution, the simulation program produces the figure in APPENDIX 1 TO BE SUBMITTED WITH THE PAPER, showing the evolution during the titration of the amounts of substance of the species involved in the titration reaction: $\text{Ag}^+$, $\text{Cl}^-$ and $\text{AgCl}$. Q5. On the figure in APPENDIX 1 TO BE SUBMITTED WITH THE PAPER, plot the evolution of the amount of nitrate ions as a function of the volume $V$ of titrant solution added. Q6. Using the curves provided by the simulation program and shown in APPENDIX 1 TO BE SUBMITTED WITH THE PAPER, qualitatively interpret the evolution of conductivity during the titration. Once the titration is complete, the evolution of the conductivity of the mixture, denoted $\sigma$, is plotted as a function of the volume $V$ of titrant solution added. The experimental results are given in Figure 2. Figure 2. Conductimetric monitoring of the titration of tap water. Graph: on the x-axis, volume of titrant solution added $V$ in mL, from 0 to 30 mL; on the y-axis, conductivity $\sigma$ in S·m$^{-1}$, from 0,034 to 0,040. The experimental points form two segments, decreasing then increasing: $\sigma$ is about 0,0378 S·m$^{-1}$ at $V=0$ mL, decreases almost linearly to a minimum of about 0,0362 S·m$^{-1}$ for $V\approx 11$ mL, then increases almost linearly to about 0,0391 S·m$^{-1}$ for $V\approx 25$ mL. The equivalence volume is read from the change in slope, at about $V_E\approx 11$ mL. The maximum chloride ion content allowing the fermentative activity of the bacteria contained in kefir grains is $2\ \text{g}\cdot\text{L}^{-1}$. Q7. Determine the mass concentration in chloride ions of this tap water and conclude whether it can be used to make kefir. The candidate is invited to take initiatives and to present their approach even if it did not lead to a result. The method used is assessed and therefore needs to be clearly presented. 2. Evolution of the kinetics of the fermentation reaction During the fermentation process, the glucose supplied by the sugar is transformed into ethanol and carbon dioxide: the resulting gas release is responsible for the sparkling appearance of this drink. The aim is to study the kinetics of this fermentation, modelled by the following reaction equation: $\text{C}_6\text{H}_{12}\text{O}_6(\text{aq}) \rightarrow 2\ \text{CH}_3\text{CH}_2\text{OH}(\text{aq}) + 2\ \text{CO}_2(\text{g})$. Data: - molecular molar mass: $M(\text{C}_6\text{H}_{12}\text{O}_6) = 180,0\ \text{g}\cdot\text{mol}^{-1}$. The method studied consists in monitoring the evolution of the ethanol concentration over time in the reaction medium, using a specific probe. For this purpose, one litre of fruit kefir is prepared in the laboratory and the concentration of dissolved ethanol in the reaction medium is measured using computerised data acquisition. The recipe used is the one proposed at the beginning of the statement, with the 20 g of sugar in the recipe replaced by 20 g of glucose. For the remainder of the exercise, $V_{\text{Boisson}}$ denotes the volume of drink prepared. Q8. State another possible method for monitoring the kinetics of this fermentation reaction. In order to monitor the kinetics of the fermentation reaction using the chosen method, it is necessary to relate the glucose concentration to the ethanol concentration in the reaction medium. Q9. Show that the evolution of the amount of glucose over time can be defined from the amount of ethanol according to the following literal expression: $n_{\text{glu}}(t) = n_{\text{glu}}(t_0) - \dfrac{C_{\text{éth}}(t)\cdot V_{\text{Boisson}}}{2}$ where $n_{\text{glu}}(t)$ and $n_{\text{glu}}(t_0)$ are the amounts of glucose respectively at time $t$ and at the initial instant $t_0 = 0$, and $C_{\text{éth}}(t)$ is the amount concentration of ethanol at time $t$. A reaction progress table may be used. We aim to verify that the evolution of the glucose concentration follows a first-order rate law. Q10. Starting from the definition of the rate of disappearance of glucose and assuming that this rate follows a first-order law, show that: $\dfrac{\text{d}C_{\text{glu}}(t)}{\text{d}t} + k\cdot C_{\text{glu}}(t) = 0$. Q11. Justify that this differential equation has as a solution a function of the form: $C_{\text{glu}}(t) = C_{\text{glu}}(0)\cdot e^{-k\cdot t}$. From the experimental results, the time evolution of the natural logarithm of the amount concentration of glucose, in mol·L$^{-1}$, is plotted. The graph obtained is given in Figure 3. Figure 3. Time evolution of the natural logarithm of the glucose concentration. Graph: on the x-axis, $t$ in s from 0 to 5000; on the y-axis, $\ln C_{\text{glu}}$ from -2,30 to -2,16. The experimental points lie on a slightly decreasing straight line, from about -2,22 at $t=0$ to about -2,24 at $t=4500$ s. The modelling equation shown is: $\ln C_{\text{glu}} = -5,34\times10^{-6}\times t - 2,22$. Q12. Justify that this graph makes it possible to confirm that the rate of disappearance of glucose during fermentation does indeed follow a first-order rate law. Q13. From the modelling equation, calculate the mass of glucose initially introduced to carry out this fermentation experiment. Comment. The half-reaction time can be calculated using the following expression: $t_{1/2}=\dfrac{\ln 2}{k}$. Q14. Determine the value of the half-reaction time using the experimental results. Conclude regarding the recipe given at the beginning of the statement, knowing that the drink must still contain sugar to taste pleasant. 3. Aroma of the plant-based kefir drink The recipe studied suggests adding a few slices of lemon to give a tangy taste. This citrus fruit contains chemical species in its peel such as limonene and citral; its juice is rich in citric acid. In this part, we aim to identify the species present in the prepared kefir that could then be responsible for the tangy taste of the drink. Figure 4. Structural formulas of citral and citric acid. Citral is shown as an unsaturated carbon chain bearing an aldehyde function $-\text{CHO}$ and two $\text{C}=\text{C}$ double bonds. Citric acid is shown as a molecule bearing three carboxylic acid functions $-\text{COOH}$ and one alcohol function $-\text{OH}$. Data: - infrared spectroscopy data: Table: O—H bond, wavenumber 3200–3700 cm$^{-1}$, characteristic band shape strong and broad; C—H bond, wavenumber 2850–3100 cm$^{-1}$, strong shape; C=C bond, wavenumber 1620–1680 cm$^{-1}$, weak and sharp shape; C=O bond, wavenumber 1650–1730 cm$^{-1}$, strong and sharp shape. - solubility data for different compounds present in lemon: Table: limonene: solubility in water low, in ethyl acetate suitable, in cyclohexane high; citral: solubility in water very low, in ethyl acetate suitable, in cyclohexane high; citric acid: solubility in water high, in ethyl acetate high, in cyclohexane zero. - miscibility of the different solvents with water: ethyl acetate: low; cyclohexane: zero. Figure 5. Absorption spectra of two species present in a lemon. Two infrared spectra are shown, transmittance in % from 0 to 100 on the y-axis and wavenumber in cm$^{-1}$ from 4000 to 500 on a decreasing x-axis. Spectrum A: strong sharp absorptions near 3000 cm$^{-1}$, very strong sharp band near 1700 cm$^{-1}$, numerous bands in the 1600–500 cm$^{-1}$ region; no very broad O—H band. Spectrum B: broad strong band between about 3700 and 2500 cm$^{-1}$, very strong absorption near 1700 cm$^{-1}$, numerous bands in the 1500–500 cm$^{-1}$ region. Q15. Assign each of the two spectra shown to citral and to citric acid. Justify. We want to identify the species present in the prepared kefir. To do this, we extract them using a solvent. Q16. Choose, with justification, among water, ethyl acetate and cyclohexane, the most suitable solvent to simultaneously extract the citral, citric acid and limonene present in the kefir. After extraction, thin-layer chromatography is performed to analyse the extract, denoted K. After development with a potassium permanganate solution, a chromatogram is obtained, a representation of which is given in Figure 6. Figure 6. Diagram of the chromatogram obtained. Chromatography plate with a horizontal spotting line at the bottom and a horizontal solvent front line at the top. Four spots aligned on the spotting line: K (fruit kefir extract), C (citral), L (limonene), A (citric acid). A small spot is observed on track K near the spotting line; a medium-sized blue spot is observed on track C at an intermediate height; a large blue spot is observed on track L at a high height close to the front; a small spot is observed on track A near the spotting line. The spots K and A are at the same height. Caption: K: Fruit kefir extract; C: Citral; L: Limonene; A: Citric acid. Q17. By analysing the chromatogram obtained, identify the species from the lemon that is found in the drink and that could be responsible for the tangy taste of the kefir.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise