Baccalauréat 2026 — Physics-Chemistry specialty, Métropole (jour 2) — exercise 1 : Tomato, a fruit full of resources (official exam paper)
Statement
Tomato is a fruit originally from South America. Eaten raw or cooked, it has become essential in many cuisines. It is a remarkable source of antioxidants such as lycopene and vitamins A and C.
In this exercise, we study the protective effect of tomato antioxidants on the body, more particularly one of them, lycopene, whose topological formula is given below:
Figure: topological formula of lycopene, a long conjugated hydrocarbon chain containing many $mathrm{C=C}$ double bonds and methyl branches.
1. Extraction of lycopene from tomato
Lycopene is the main antioxidant present in tomato and it is also the pigment that contributes to its color. We want to extract lycopene from tomato in order to use it afterwards as a reagent in the synthesis of organic molecules.
Data:
- molecular molar mass of lycopene: $M_{\text{lycopène}} = 536\ \mathrm{g\cdot mol^{-1}}$;
- comparative table of physico-chemical properties of different solvents (at 20 °C):
Table. Columns: Solvent; Water; Ethanol; Ethyl acetate; Dichloromethane. Line “Miscibility with water”: total; total; low; none. Line “Density”: 1.00; 0.79; 0.90; 1.33. Line “Lycopene solubility”: very low; medium; very high; very high. Line “Safety pictograms”: water: none; ethanol: flammable and irritant; ethyl acetate: flammable and irritant; dichloromethane: irritant and serious health hazard.
- infrared spectroscopy data:
Table. Columns: bond; O–H; C–H; C=C; C=O. Line “Wavenumber (in $\mathrm{cm^{-1}}$)”: 3200–3700; 2850–3100; 1620–1680; 1650–1730. Line “Appearance of the characteristic band”: strong and broad; strong; weak and narrow; strong and narrow.
- color wheel: circular diagram indicating color ranges as a function of wavelength: violet around 400 nm, blue around 450 nm, green around 500 nm, yellow around 570 nm, orange around 590 nm, red around 630 nm up to 700 nm.
The lycopene extraction protocol used for tomato is as follows:
- finely grind 25 g of fresh tomato then add 50 mL of distilled water and 75 mL of ethyl acetate;
- let it macerate with stirring for about ten minutes;
- filter under vacuum then transfer the filtrate into a separatory funnel;
- collect the organic phase and place it in a 100 mL volumetric flask. Make up to the calibration mark with ethyl acetate to obtain a solution denoted $S_1$.
Q1. Give two arguments in favor of using ethyl acetate as a solvent for extracting lycopene from tomato.
Q2. Draw the separatory funnel after decantation and indicate the relative positions of the organic and aqueous phases, specifying in which phase the lycopene is found.
A reference solution containing lycopene, with concentration $C_0 = 1{,}8\times 10^{-5}\ \mathrm{mol\cdot L^{-1}}$, denoted $S_0$, is available. To determine the mass of lycopene extracted from the tomato contained in solution $S_1$, the UV-visible spectrum of the reference solution $S_0$ is recorded on the one hand and that of solution $S_1$ on the other hand. The spectra obtained are shown in Figure 1.
Figure 1. Absorption spectra of solutions $S_0$ and $S_1$. Graph: x-axis “Wavelength in nm” from 380 to 630 nm approximately; y-axis “Absorbance” from 0.0 to 1.2. The dashed curve “Solution $S_0$” shows high absorbance in the violet-blue region, with a maximum near 1.15 around 430–440 nm, then decreases sharply after 470 nm to about 0.1 around 630 nm. The solid curve “Solution $S_1$” shows a maximum near 0.60 around 430–440 nm, then decreases gradually: about 0.35 around 490 nm, 0.25 around 530 nm, 0.15 around 580 nm and 0.10 around 630 nm.
Q3. Explain the yellow color of solution $S_0$.
Q4. Using Beer-Lambert’s law, show that the lycopene concentration in solution $S_1$ is close to $C_1 = 0{,}95\times 10^{-5}\ \mathrm{mol\cdot L^{-1}}$.
Q5. Deduce the mass of extracted lycopene. Comment, knowing that 100 g of fresh tomato contain a few milligrams of lycopene.
2. Lycopene, a chemical species full of resources
In the laboratory, new antioxidants can be synthesized from lycopene. Species (1) below is obtained in the laboratory from lycopene. It is itself used as a reagent in the synthesis of species (2), known for its antioxidant power even greater than that of lycopene.
Figure 2. Reaction equation for the synthesis of species (2) from species (1). Reaction scheme: species (1), with condensed formula represented by a $\mathrm{C_{19}H_{27}}$ chain bearing a double bond and an ester group circled A, reacts with $\mathrm{H_2O}$ to give species (2), containing the same chain and a carboxylic acid group circled B, as well as $\mathrm{CH_3OH}$ (species (3)). The species are labeled (1), (2) and (3).
Q6. Name the chemical families associated with the characteristic groups A and B circled in Figure 2.
Q7. Choose the reaction category that corresponds to the equation shown in Figure 2, among the following categories: substitution, elimination or addition. Justify.
Q8. Explain how the comparative study of the IR spectra of reagent (1) and of the obtained product, isolated after purification and drying, would make it possible to verify that the synthesis did indeed occur.
3. Modeling the antioxidant properties of tomato
In the human body, the degradation of organic molecules in cells can be caused by species called “free radicals”, which are powerful oxidants. This degradation contributes to cellular aging; lycopene can be used to fight it.
In this part, aging is modeled by a simple redox reaction called the “model reaction”. This transformation is considered total and involves peroxodisulfate ions $\mathrm{S_2O_8^{2-}}$ and iodide ions $\mathrm{I^-}$.
The reaction equation is:
$2\ \mathrm{I^-}(aq) + \mathrm{S_2O_8^{2-}}(aq) \rightarrow \mathrm{I_2}(aq) + 2\ \mathrm{SO_4^{2-}}(aq)$
Q9. Write the two electron half-equations and the two oxidant-reductant couples involved in the “model reaction”.
Q10. Explain then why peroxodisulfate ions play the same role as free radicals during the chemical transformation.
We want to study the influence of the presence of lycopene on the chemical transformation. First, we monitor the time evolution of the “model reaction” without adding lycopene.
We place in a beaker 20 mL of distilled water and 5 mL of potassium iodide solution with concentration equal to $C = 1{,}0\ \mathrm{mol\cdot L^{-1}}$. Then, we add as quickly as possible a volume $V = 5{,}0\ \mathrm{mL}$ of a sodium peroxodisulfate solution with peroxodisulfate ion concentration $[\mathrm{S_2O_8^{2-}}]_i = 0{,}017\ \mathrm{mol\cdot L^{-1}}$.
The stopwatch is started at this instant. A series of measurements makes it possible to follow the time evolution of the concentration of peroxodisulfate ions in the mixture. The results obtained are shown in Figure 3 below:
Figure 3. Time evolution of the concentration of peroxodisulfate ions. Graph: x-axis “Time (s)” from 0 to 200 s; y-axis “Concentration of peroxodisulfate ions ($\mathrm{mmol\cdot L^{-1}}$)” from 0.0 to 3.0. The experimental points decrease monotonically and curve downward: about 2.85 mmol·L$^{-1}$ at 0 s, 2.15 at 5 s, 1.60 at 15 s, 1.25 at 25 s, 1.00 at 35 s, 0.70 at 50 s, 0.45 at 65 s, 0.25 at 80 s, 0.15 at 100 s, then close to 0 after 150–190 s.
Q11. Define the half-reaction time noted $t_{1/2}$.
Q12. Determine its value graphically.
Analysis of the results makes it possible to obtain the graph below showing the rate of disappearance of peroxodisulfate ions as a function of their concentration.
Figure 4. Evolution of the rate of disappearance of peroxodisulfate ions as a function of their concentration. Graph: x-axis “Concentration of peroxodisulfate ions ($\mathrm{mol\cdot L^{-1}}$)” from 0 to 0.002; y-axis “Rate of disappearance of peroxodisulfate ions ($\mathrm{mol\cdot L^{-1}\cdot s^{-1}}$)” from 0 to 0.00006. The experimental points are globally aligned on an increasing straight line passing near the origin: for example about $(0{,}0002 ; 0{,}000007)$, $(0{,}0006 ; 0{,}000016)$, $(0{,}0010 ; 0{,}000025)$, $(0{,}0014 ; 0{,}000034)$, $(0{,}0016 ; 0{,}000040)$, $(0{,}00185 ; 0{,}000055)$.
Q13. Define the volumetric rate of disappearance of peroxodisulfate ions.
Q14. Discuss the compatibility of the results shown in Figure 4 with the model of a first-order reaction.
To study the influence of lycopene on the “model reaction”, a tomato is finely ground and distilled water is added. Vacuum filtration is carried out: the filtrate obtained is tomato water.
Four solutions are prepared by making the mixtures indicated in the following table. Solution A is the same solution as the one used in the previous study of the “model reaction”, without lycopene addition.
Table. Columns: Solution A; Solution B; Solution C; Solution D. Line “Volume in mL of potassium iodide solution ($\mathrm{K^+}(aq) ; \mathrm{I^-}(aq)$) with concentration equal to $1{,}0\ \mathrm{mol\cdot L^{-1}}$”: 5.0; 5.0; 5.0; 5.0. Line “Volume of tomato water in mL”: 0; 5.0; 10.0; 20.0. Line “Volume of distilled water in mL”: 20.0; 15.0; 10.0; 0.
In each of the prepared solutions, 5.0 mL of a sodium peroxodisulfate solution with peroxodisulfate ion concentration $[\mathrm{S_2O_8^{2-}}] = 0{,}017\ \mathrm{mol\cdot L^{-1}}$ is added as quickly as possible. The stopwatch is started at this instant, then the evolution of the diiodine concentration is determined for each of the experiments, respectively called experiments A, B, C and D. The results are shown in Figure 5.
Figure 5. Kinetic monitoring of the “model reaction” for each of the four solutions. Graph: x-axis “Time (s)” from 0 to 200 s; y-axis “Concentration of diiodine in the solution ($\mathrm{mol\cdot L^{-1}}$)” from 0.0000 to 0.0030. Four point curves: experiment A (blue circles) increases from the start and tends toward a plateau of about 0.00285 mol·L$^{-1}$; experiment B (gray squares) shows a very short initial plateau then increases toward about 0.00255 mol·L$^{-1}$; experiment C (gray triangles) shows an initial plateau up to about 25–30 s then increases toward about 0.00220–0.00225 mol·L$^{-1}$; experiment D (gray diamonds) shows an initial plateau up to about 60–65 s then increases toward about 0.00160–0.00165 mol·L$^{-1}$. The initial plateaus and final concentrations decrease as the volume of tomato water increases.
Q15. Explain qualitatively the presence of a plateau at the beginning of the curves associated with experiments B, C and D.
Q16. Determine the limiting reagent of the “model reaction” in the study carried out with solution A.
Q17. Recover, by calculation, the final concentration value of diiodine in the experiment with solution A.
The limiting reagent in experiments B, C and D is the same as in experiment A.
Q18. Compare graphically the final diiodine concentrations obtained for experiments B, C and D, relative to that obtained in experiment A. Comment in light of the amount of tomato water used.
Q19. From the graph, determine the amount of peroxodisulfate ions that reacted with lycopene for solution D.
The candidate is invited to take initiatives and present the approach followed, even if it did not lead to a result. The approach is assessed and must be properly presented.
Lycopene is sold in dietary supplements for its antioxidant power.
Q20. By analyzing the results obtained, justify this sales argument.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise