Baccalauréat 2026 — Physics-Chemistry specialty, Polynésie française (jour 2) — exercise 1 : Green algae (official exam paper)
Statement
Green tides, sometimes observed on the French coastline, result from the massive proliferation of algae linked to an increase in the concentration of nitrogen and phosphorus atoms in the aquatic environment. This phenomenon can become dangerous for human health, notably because of the release of hydrogen sulfide $\mathrm{H_2S}$ during the decomposition of the algae.
The aim of this exercise, whose parts are independent, is:
- to determine the mass concentration of nitrate ions in groundwater (Part A);
- to study the production of hydrogen sulfide by green algae (Part B);
- to study the different ways of valorizing green algae (Part C).
Part A: Titration of nitrate ions.
Nitrate ions, coming from the intensive use of fertilizers, seep into aquifers and eventually reach groundwater and then the coastline, which allows green algae to multiply.
European regulations set a threshold of $50\ \mathrm{mg\cdot L^{-1}}$ of nitrate ions for water intended for human consumption.
To determine the nitrate ion concentration in water, the titration is carried out in two steps.
Step 1: Nitrate ions $\mathrm{NO_3^-}$, in acidic medium, react with an excess amount of metallic copper according to a total chemical transformation modeled by the following reaction:
$3\ \mathrm{Cu(s)} + 2\ \mathrm{NO_3^-(aq)} + 8\ \mathrm{H^+(aq)} \rightarrow 2\ \mathrm{NO(g)} + 4\ \mathrm{H_2O(\ell)} + 3\ \mathrm{Cu^{2+}(aq)}$ (1)
In a flask fitted with a water condenser, a volume $V_{\mathrm{eau}} = 50,0\ \mathrm{mL}$ of Breton groundwater, $50\ \mathrm{mg}$ of copper shavings and $5\ \mathrm{mL}$ of concentrated sulfuric acid are introduced. After reflux heating and cooling, the contents of the flask are filtered and collected in an Erlenmeyer flask.
Q1. State two advantages provided by the use of reflux heating.
Step 2: Copper ions $\mathrm{Cu^{2+}}$ react with excess ammonia $\mathrm{NH_3}$ to form a colored compound: tetraamminecopper(II), denoted $[\mathrm{Cu(NH_3)_4}]^{2+}$, according to a total chemical transformation modeled by the following reaction:
$\mathrm{Cu^{2+}(aq)} + 4\ \mathrm{NH_3(aq)} \rightarrow [\mathrm{Cu(NH_3)_4}]^{2+}\mathrm{(aq)}$ (2)
A concentrated ammonia solution is added to the solution obtained in step 1. The mixture is then transferred to a $100,0\ \mathrm{mL}$ volumetric flask and made up to the mark with distilled water. The resulting colored solution is called S. The amount of copper ions initially present, denoted $n_{\mathrm{Cu}^{2+}}$, is equal to the amount of the colored compound $[\mathrm{Cu(NH_3)_4}]^{2+}$, which is determined using a spectrophotometric calibration titration.
To carry out a calibration titration, a stock solution $S_0$ of the compound $[\mathrm{Cu(NH_3)_4}]^{2+}$ with concentration equal to $2,0\ \mathrm{mmol\cdot L^{-1}}$ is available.
Three daughter solutions $S_1$, $S_2$ and $S_3$ with respective amount-of-substance concentrations $1,5\ \mathrm{mmol\cdot L^{-1}}$, $1,0\ \mathrm{mmol\cdot L^{-1}}$ and $0,50\ \mathrm{mmol\cdot L^{-1}}$ are obtained by diluting the stock solution in $10,0\ \mathrm{mL}$ volumetric flasks.
Q2. Name the glassware needed to prepare the daughter solution $S_2$, detailing the calculation of the volume to be taken.
The solution $S_0$ is used to obtain the absorption spectrum of the colored compound $[\mathrm{Cu(NH_3)_4}]^{2+}$ (Figure 1).
Figure 1. Absorption spectrum of the colored compound $[\mathrm{Cu(NH_3)_4}]^{2+}$. The graph shows absorbance $A$ as a function of wavelength $\lambda$ in nm, from $500$ to $800\ \mathrm{nm}$. The red curve starts from a low absorbance near $500\ \mathrm{nm}$, rises sharply, reaches a maximum near $600\ \mathrm{nm}$, then decreases gradually to a low absorbance near $800\ \mathrm{nm}$.
Data:
- Molar mass of nitrate ion $\mathrm{NO_3^-}$: $M_{\mathrm{NO_3^-}} = 62,0\ \mathrm{g\cdot mol^{-1}}$;
- Color wheel: the diagram associates the following approximate wavelengths with colors: $400\ \mathrm{nm}$ on the violet/UV side, $480\ \mathrm{nm}$ blue, $530\ \mathrm{nm}$ green, $580\ \mathrm{nm}$ yellow, $600\ \mathrm{nm}$ orange, $750\ \mathrm{nm}$ red/IR.
Q3. Suggest an appropriate wavelength value for the calibration titration and deduce the color of solution $S_0$ of the colored compound $[\mathrm{Cu(NH_3)_4}]^{2+}$.
The absorbance at the appropriate wavelength $\lambda$ is measured for each standard solution and for the unknown solution S. The results are given in the table below and shown in Figure 2.
Measurement table:
Solution: $S_0$, $S_1$, $S_2$, $S_3$, S.
Concentration (in $\mathrm{mmol\cdot L^{-1}}$): $2,0$ ; $1,5$ ; $1,0$ ; $0,50$ ; ?
Absorbance: $1,208$ ; $0,906$ ; $0,599$ ; $0,310$ ; $0,403$.
Figure 2. Calibration curve of absorbance as a function of the concentration of the colored compound $[\mathrm{Cu(NH_3)_4}]^{2+}$. The graph shows $A$ on the y-axis from $0,00$ to $1,25$ and amount-of-substance concentration on the x-axis from $0,0$ to $2,1\ \mathrm{mmol\cdot L^{-1}}$. The calibration points lie on a line passing almost through the origin: approximately $(0,50 ; 0,310)$, $(1,0 ; 0,599)$, $(1,5 ; 0,906)$ and $(2,0 ; 1,208)$.
Q4. Explain how the graphical representation in Figure 2 is consistent with Beer-Lambert’s law.
Q5. Using Figure 2 and the table preceding it, show that the amount of copper ions $\mathrm{Cu^{2+}}$ formed $n_{\mathrm{Cu}^{2+}}$ in solution S is $6,7 \times 10^{-5}\ \mathrm{mol}$.
Q6. From the reaction equation (1) of step 1, show that the relationship between the amount of nitrate ions contained in the groundwater $n_{\mathrm{NO_3^-}}$ and the amount of copper ions formed $n_{\mathrm{Cu}^{2+}}$ is:
$n_{\mathrm{NO_3^-}} = \dfrac{2}{3} \times n_{\mathrm{Cu}^{2+}}$
Q7. Deduce the mass concentration $C_{m\mathrm{NO_3^-}}$ of nitrate ions present in the $50,0\ \mathrm{mL}$ of groundwater. Conclude on the quality of the groundwater studied.
Part B: Hydrogen sulfide.
Hydrogen sulfide with formula $\mathrm{H_2S}$ is a highly toxic gas. Green algae release this gas as they decompose because of sulfate-reducing bacteria that transform sulfate ions $\mathrm{SO_4^{2-}}$ into hydrogen sulfide $\mathrm{H_2S}$ in the absence of dioxygen.
Data:
- Oxidant/reductant couples: $\mathrm{SO_4^{2-}(aq)} / \mathrm{H_2S(aq)}$; $\mathrm{O_2(g)} / \mathrm{H_2O(\ell)}$;
- Acid-base pairs at $25\ ^\circ\mathrm{C}$: $\mathrm{H_2S(aq)} / \mathrm{HS^-(aq)}$, $pK_{A1} = 7,0$; $\mathrm{HS^-(aq)} / \mathrm{S^{2-}(aq)}$, $pK_{A2} = 12$;
- pH of seawater: $8,2$;
- Extract from the label of a bottle of gaseous hydrogen sulfide: environmental hazard pictogram with the statement “H400 - Very toxic to aquatic life”; skull-and-crossbones pictogram with the statement “H330 - Fatal if inhaled”.
Q8. Justify the term “reducing” used in the name “sulfate-reducing” for these bacteria.
We want to model the chemical transformation between hydrogen sulfide and seawater using the couples $\mathrm{H_2S(aq)} / \mathrm{HS^-(aq)}$ and $\mathrm{H_3O^+(aq)} / \mathrm{H_2O(\ell)}$.
Q9. Write the acid-base reaction equation modeling this chemical transformation.
Q10. Draw the predominance diagram for the acid-base couples $\mathrm{H_2S(aq)} / \mathrm{HS^-(aq)}$ and $\mathrm{HS^-(aq)} / \mathrm{S^{2-}(aq)}$. Indicate the chemical species that predominates when green algae are in contact with seawater.
Q11. Write the redox equation that occurs when hydrogen sulfide $\mathrm{H_2S}$ comes into contact with dioxygen $\mathrm{O_2}$ as the algae dries out. Justify that the medium undergoes acidification.
To verify the acidification of the medium, we propose calculating the new pH. To do this, we study the acid-base couple $\mathrm{H_2S(aq)} / \mathrm{HS^-(aq)}$. We assume that the amount-of-substance concentration of sulfide ions $\mathrm{S^{2-}}$ is negligible.
Q12. Recall the expression of the acid dissociation constant $K_{A1}$ of the couple $\mathrm{H_2S(aq)} / \mathrm{HS^-(aq)}$ in terms of the equilibrium amount-of-substance concentrations of hydrogensulfide ions $[\mathrm{HS^-}]$, hydrogen sulfide $[\mathrm{H_2S}]$ and oxonium ions $[\mathrm{H_3O^+}]$.
The pH of the medium can be determined using the following expression, which is given:
$\mathrm{pH} = \dfrac{1}{2} \times \left( pK_{A1} - \log\left( \dfrac{K_{\mathrm{H_2S}} \times p_{\mathrm{H_2S}}}{p^\circ} \right) \right)$
Where $K_{\mathrm{H_2S}}$ is the equilibrium constant between aqueous hydrogen sulfide $\mathrm{H_2S(aq)}$ and gaseous hydrogen sulfide $\mathrm{H_2S(g)}$, $p_{\mathrm{H_2S}}$ the partial pressure of $\mathrm{H_2S(g)}$ in bar and $p^\circ$ the standard pressure in bar.
Data:
- Equilibrium constant $\mathrm{H_2S(g)} \rightleftarrows \mathrm{H_2S(aq)}$: $K_{\mathrm{H_2S}} = 0,09$;
- Partial pressure of $\mathrm{H_2S(g)}$: $p_{\mathrm{H_2S}} = 0,1\ \mathrm{bar}$;
- Standard pressure: $p^\circ = 1\ \mathrm{bar}$.
Q13. Calculate the pH value. Deduce the predominant chemical species at this pH. Indicate the health and environmental risks of leaving the green algae to dry on the beach.
Part C: Valorization of green algae.
The valorization of algae uses the starch present in green algae. Starch is made up of two polymers, one of which has the following structure:
Figure 3. Skeletal formula of amylose, a starch polymer. The structure shown is a chain of several six-membered glucosidic rings linked together by oxygen atoms; each ring carries several hydroxyl groups $-\mathrm{OH}$. A $-\mathrm{OH}$ group carried by a $-\mathrm{CH_2OH}$ substituent is circled with a dotted line.
Q14. Name the functional family corresponding to the characteristic group circled with a dotted line in Figure 3.
Q15. Identify and copy onto your answer sheet the repeating unit of the polymer in Figure 3.
Data:
- Ideal gas law: $PV = nRT$, where $P$ is the gas pressure in Pa, $V$ its volume in $\mathrm{m^3}$, $n$ its amount of substance in mol, $T$ its temperature in K and $R$ the ideal gas constant;
- $R = 8,314\ \mathrm{J\cdot K^{-1}\cdot mol^{-1}}$;
- $1\ \mathrm{bar} = 10^5\ \mathrm{Pa}$;
- Temperature conversion: $T(\mathrm{K}) = \theta(^\circ\mathrm{C}) + 273$;
- Molar mass of ethanol $\mathrm{C_2H_6O}$: $M_{\mathrm{C_2H_6O}} = 46,0\ \mathrm{g\cdot mol^{-1}}$;
- Density of ethanol $\mathrm{C_2H_6O}$: $\rho_{\mathrm{C_2H_6O}} = 789\ \mathrm{g\cdot L^{-1}}$;
- Table comparing SP95 and E85 fuels:
SP95 fuel: volume of fuel consumed for $100\ \mathrm{km}$: $7,0\ \mathrm{L}$; volume of carbon dioxide released over a $100\ \mathrm{km}$ trip: $8,3\ \mathrm{m^3}$.
E85 fuel: volume of fuel consumed for $100\ \mathrm{km}$: $9,3\ \mathrm{L}$; volume of carbon dioxide released over a $100\ \mathrm{km}$ trip: ?
Fermentation of the starch in green algae makes it possible to produce “bioethanol” $\mathrm{C_2H_6O}$. Bioethanol is a fuel that can be used by combustion in certain cars in the form of E85 ($85\ \%$ by volume bioethanol and $15\ \%$ by volume SP95 gasoline) according to the reaction equation:
$\mathrm{C_2H_6O(g)} + 3\ \mathrm{O_2(g)} \rightarrow 2\ \mathrm{CO_2(g)} + 3\ \mathrm{H_2O(g)}$
Q16. Show that the amount of bioethanol $n_{\mathrm{C_2H_6O}}$ contained in the volume of E85 needed to travel $100\ \mathrm{km}$ is close to $1,4 \times 10^2\ \mathrm{mol}$.
Carbon dioxide will be considered to behave as an ideal gas at a temperature $\theta$ of $20\ ^\circ\mathrm{C}$ and an atmospheric pressure $p_{\mathrm{atm}}$ of $1,013\ \mathrm{bar}$.
For the following question, the candidate is invited to take initiative and present the approach followed, even if it did not lead to a result. The approach is assessed and must be properly presented.
Q17. Determine the volume of $\mathrm{CO_2}$, denoted $V_{\mathrm{CO_2}}$, released over a $100\ \mathrm{km}$ trip by the combustion of the bioethanol contained in E85. Compare this value with the volume of carbon dioxide released if SP95 gasoline is used for the same trip and conclude on the advantage of bioethanol.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise