Solved exercises🧮 Solve my exercise

Brevet (DNB) 2024 — Physics-Chemistry general stream, Métropole, Antilles et Guyane 2024 — exercise 1 : Olympic Games: Swimming Pool and Diving (official exam paper)

PhysicsLevel : Middle schoolOlympic Games: Swimming Pool and Diving🌐 Lire en français
Statement
France is hosting the Olympic and Paralympic Games this year, during which thirty-two sports disciplines will be in the spotlight. The only sports facility built for the occasion will be the aquatic center, next to the Stade de France, where the artistic swimming, diving and water polo events will take place. Illustrative document: photograph of a diving pool in an aquatic center, with diving platforms and Olympic rings on a blue wall. From www.paris2024.org. Swimming pool and water balance The recommendations of the International Olympic Committee specify an ideal pH range of 7.2 to 7.8 for pool water. If the pH becomes too high, above 8, disinfection with “chlorine” is no longer effective, and the formation of “scale” increases. If the pH of the water falls below 7, the comfort of swimmers is no longer guaranteed (skin and eye irritation) and the service life of equipment, especially metal equipment, is reduced. From the IOC guide on sport, environment and sustainable development and https://www.ars.sante.fr Question 1 (2 points) 1- Give the two disadvantages of pool water whose pH is below 7. Phenol red, with chemical formula $C_{19}H_{14}O_5S$, is a color indicator. It is a substance that changes color depending on the pH of the tested solution. It is therefore used to check the pH of swimming pools. The table below indicates its color ranges on the pH scale. Table: Color of phenol red and pH range. Yellow: pH values between 0 and 6.6. Orange: pH values between 6.6 and 8.4. Red: pH values between 8.4 and 14. From https://fr.wikipedia.org A maintenance worker wants to check the pH of the water in the future Olympic pool. He obtains a red color in the phenol red test result. Question 2 (6 points) 2a- State whether the pool water tested by the maintenance worker is acidic, basic or neutral. Justify. 2b- Knowing that in the formula of the phenol red molecule, the symbol S corresponds to the sulfur atom, give the names of the other atoms that make it up. In aquatic centers, metal equipment is mainly made of stainless steel. Thus, iron (Fe) is not recommended because it undergoes many chemical transformations that weaken it. The chemical reaction equation below models the action of $H^+$ ions, responsible for acidity, on iron atoms: $Fe + 2\ H^+ \rightarrow Fe^{2+} + H_2$ Question 3 (3 points) 3- From among the chemical formulas of the species present in the reaction equation above, give the formula of a molecule, that of an atom and that of an ion. Characteristic tests can be carried out on the reaction medium to identify the products of the reaction. Database of characteristic tests: - Flame test; ion tested or molecule tested: dihydrogen; observation: a pop. - Glowing splint test; ion tested or molecule tested: dioxygen; observation: the splint relights. - Sodium hydroxide test; ion tested or molecule tested: ion $Fe^{2+}$; observation: green precipitate. - Sodium hydroxide test; ion tested or molecule tested: ion $Fe^{3+}$; observation: rust-colored precipitate. Question 4 (2 points) 4- Iron (Fe) was reacted with $H^+$ ions in a test tube. Using the database above and the reaction equation seen earlier, write on your answer sheet the numbers of the correct statements among the following: $P_1$ : A green precipitate is observed when sodium hydroxide is added; $P_2$ : A rust-colored precipitate is observed when sodium hydroxide is added; $P_3$ : A pop is heard when a flame is brought near; $P_4$ : When a glowing splint is brought near, it relights. 10-meter diving event We will focus on the 10 m diving discipline. Studies have made it possible to define the human body’s tolerance to such a jump. For safety reasons, the international swimming federation limits, in competition, the speed reached upon contact with the water to about 80 km/h. Graph 1: Change in the diver’s kinetic energy $E_c$ as a function of time $t$ during the dive (simulation). Horizontal axis: $t$ in seconds, from 0 to 1.7 s; origin indicated as “Start of the dive”. Vertical axis: $E_c$ in J, from 0 to 8000 J. The plotted points show that kinetic energy decreases slightly at the very beginning and then increases more and more rapidly until impact. Approximate values read: at $t=0$ s, $E_c \approx 250$ J; 0.1 s, $\approx 160$ J; 0.2 s, $\approx 120$ J; 0.3 s, $\approx 150$ J; 0.4 s, $\approx 280$ J; 0.5 s, $\approx 430$ J; 0.6 s, $\approx 650$ J; 0.7 s, $\approx 950$ J; 0.8 s, $\approx 1300$ J; 0.9 s, $\approx 1750$ J; 1.0 s, $\approx 2250$ J; 1.1 s, $\approx 2800$ J; 1.2 s, $\approx 3500$ J; 1.3 s, $\approx 4200$ J; 1.4 s, $\approx 4950$ J; 1.5 s, $\approx 5800$ J; 1.6 s, $\approx 6700$ J. A dotted vertical line around $t \approx 1.6$ s is labeled “impact”, with a final point near $E_c \approx 6900$ J. Graph 2: Change in the diver’s speed $v$ as a function of time $t$ during the dive (simulation). Horizontal axis: $t$ in seconds, from 0 to 1.7 s; origin indicated as “Start of the dive”. Vertical axis: $v$ in m/s, from 0 to 16 m/s. The plotted points show that the speed decreases slightly at the beginning and then increases almost linearly until impact. Approximate values read: at $t=0$ s, $v \approx 2.8$ m/s; 0.1 s, $\approx 2.2$ m/s; 0.2 s, $\approx 2.0$ m/s; 0.3 s, $\approx 2.2$ m/s; 0.4 s, $\approx 2.8$ m/s; 0.5 s, $\approx 3.5$ m/s; 0.6 s, $\approx 4.3$ m/s; 0.7 s, $\approx 5.2$ m/s; 0.8 s, $\approx 6.1$ m/s; 0.9 s, $\approx 7.1$ m/s; 1.0 s, $\approx 8.0$ m/s; 1.1 s, $\approx 9.0$ m/s; 1.2 s, $\approx 10.0$ m/s; 1.3 s, $\approx 10.9$ m/s; 1.4 s, $\approx 11.8$ m/s; 1.5 s, $\approx 12.8$ m/s; 1.6 s, $\approx 13.8$ to 14.0 m/s. A dotted vertical line around $t \approx 1.6$ s is labeled “impact”. Question 5 (12 points) 5a- Describe how the diver’s kinetic energy changes over time. 5b- Name the form of energy that is converted into kinetic energy during the dive. 5c- State the duration of the dive in seconds, denoted $t_i$. 5d- Using the graphs above, determine whether the speed at the moment of impact, denoted $v_i$, makes it possible to meet the safety standard on the speed reached upon contact with the water. Any approach, even partial, will be taken into account.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise