Brevet (DNB) 2024 — Physics-Chemistry general stream, Pays du groupe 1 2024 — exercise 1 : Exploring the Seabed (official exam paper)
Statement
Exploring the Seabed
Part A - Corals (5 points)
For optimum growth, corals must be found in seawater with a pH between 8.0 and 8.4.
Illustrative document: photograph of underwater corals, showing colonies of branching corals in seawater.
1. State whether seawater favorable to corals is acidic or basic. Justify.
Corals are marine living beings whose skeleton is made of calcium carbonate with chemical formula $CaCO_3$.
2. Indicate the number of carbon atoms (C) and the number of oxygen atoms (O) appearing in the chemical formula of calcium carbonate.
Part B – The marine environment of corals (9 points)
The coral skeleton contains calcium ions $Ca^{2+}$ coming from seawater.
To verify the presence of the calcium ion $Ca^{2+}$ in seawater, we want to carry out a characteristic test on a seawater sample.
We have the materials and products shown in document 1 below.
Document 1 – Available materials and products: table showing six available materials or products. Column 1: bottle containing a sample of the seawater being tested. Column 2: test tube. Column 3: beaker. Column 4: dropper 1 containing a silver nitrate solution. Column 5: dropper 2 containing an ammonium oxalate solution. Column 6: dropper 3 containing a sodium hydroxide solution.
Document 2 below presents characteristic tests for some ions.
Document 2 - Characteristic tests for some ions: table with three columns.
- Chemical species sought: chloride ions $Cl^-$; reagent used: silver nitrate; expected result: formation of a white precipitate that turns black in light.
- Chemical species sought: calcium ions $Ca^{2+}$; reagent used: ammonium oxalate; expected result: formation of a white precipitate.
- Chemical species sought: iron(II) ions $Fe^{2+}$; reagent used: sodium hydroxide; expected result: formation of a green precipitate.
3. Using documents 1 and 2, propose an experimental procedure allowing the presence of the calcium ion $Ca^{2+}$ in the seawater being tested to be verified. Safety aspects are not expected.
Note: labeled diagrams may be used.
4. In the experiment in question 3, state the expected observation at the end of the test if the seawater contains $Ca^{2+}$ ions.
To determine the density of a seawater sample, the following measurements are made:
Measurement diagram: on the left, an empty graduated cylinder placed on a scale indicates a mass of 47 g. On the right, the same graduated cylinder containing seawater is placed on a scale indicating a total mass of 119 g. The graduated cylinder is marked in milliliters from 0 to 150 mL; the volume of seawater read in the cylinder is 70 mL. A bracket identifies the liquid as "seawater". A horizontal arrow indicates the transition from the empty cylinder to the cylinder containing seawater.
N.B. The cylinder is graduated in milliliters, mL.
5. Using the measurement results, determine the density of the seawater sample.
- Reminder: density: $\rho = \dfrac{m}{V}$
Part C - Diver’s descent (6 points)
During a dive, a diver is subjected to two forces:
- his weight $P$ which models the action exerted by the Earth;
- the "buoyant force" $F$ which models the action exerted by the water.
These two forces are represented by arrows A and B in document 3.
Document 3 - Forces exerted on the diver: diagram of a diver underwater in a frame. Two vertical arrows are shown: arrow A is directed upward from the diver, arrow B is directed downward from the diver.
6. Indicate which of the two arrows A and B corresponds to the diver’s weight $P$. Justify.
For a diver to descend, the value of his weight must be greater than the value of the buoyant force.
A diver has a mass $m = 90\ kg$.
7. Calculate the value of the weight $P$ of this diver.
Given: gravitational field strength on Earth $g = 10\ N/kg$
The value of the buoyant force exerted on this diver is $F = 850\ N$.
8. Deduce whether the diver will be able to descend. Justify.
Part D - Diving depth (5 points)
The depth of a seabed can be determined using a sonar placed under the hull of a boat, the principle of which is presented in document 4 below.
Document 4 - Sonar principle: diagram showing a boat at the water surface above the seabed. The depth is denoted by $d$ between the surface and the seabed. An emitted sound signal travels vertically down from the boat to the seabed, then a reflected signal travels vertically back up to the boat. Associated text: "The sonar emits a sound signal that reflects off the seabed at depth $d$. Measuring the duration of a round trip of the sound signal makes it possible to determine the depth $d$ knowing that the speed of propagation of a sound signal in seawater is $v = 1500\ m/s$."
The depth of a seabed was determined by a boat equipped with sonar from the duration $T$ of a round trip of the sound signal. The measured value is $T = 0.04\ s$.
9. Determine the depth $d$ at which the seabed is located. Explain the method.
Show the calculations. Any method will be rewarded.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise